Nix module to create SD images for Rasperry Pi Zero 2 W

raspberry-pi-zero-2.nix

{ config, lib, pkgs, ... }:
{
  imports = [
    <nixpkgs/nixos/modules/installer/sd-card/sd-image-aarch64-installer.nix>
    ./sd-image.nix
  ];
  system.stateVersion = "23.11";

  # Pi Zero 2 struggles to work without swap
  sdImage.swap.enable = true;
  sdImage.extraFirmwareConfig = {
    # Give up VRAM for more Free System Memory
    # - Disable camera which automatically reserves 128MB VRAM
    start_x = 0;
    # - Reduce allocation of VRAM to 16MB minimum for non-rotated (32MB for rotated)
    gpu_mem = 16;
  };
  # bzip2 compression takes loads of time with emulation, skip it. Enable this if you're low on space.
  sdImage.compressImage = false;

  networking = {
    interfaces."wlan0".useDHCP = true;
    wireless = {
      enable = true;
      interfaces = [ "wlan0" ];
      networks = {
        "<ssid>" = {
          psk = "<ssid-key>";
        };
      };
    };
  };

  # Enable OpenSSH out of the box.
  services.sshd.enable = true;

  # NTP time sync.
  services.timesyncd.enable = true;

}

sd-image.nix

# This module extends the official sd-image.nix with the following:
# - ability to add a swap partition to the built image
# - ability to add options to the config.txt firmware
# - fix the uboot bug with pi zero 2
# Related issue: https://github.com/NixOS/nixpkgs/issues/216886
# Original file: https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/installer/sd-card/sd-image.nix

{ config, lib, pkgs, ... }:

with lib;

let
  rootfsImage = pkgs.callPackage <nixpkgs/nixos/lib/make-ext4-fs.nix> ({
    inherit (config.sdImage) storePaths;
    compressImage = config.sdImage.compressImage;
    populateImageCommands = config.sdImage.populateRootCommands;
    volumeLabel = "NIXOS_SD";
  } // optionalAttrs (config.sdImage.rootPartitionUUID != null) {
    uuid = config.sdImage.rootPartitionUUID;
  });

in
{
  options.sdImage = {
    swap = {
      enable = mkEnableOption "Create a swap partition.";
      partitionName = mkOption {
        type = types.str;
        default = "SWAP";
        description = lib.mdDoc ''
          Name of the partition which holds the swap.
        '';
      };
      size = mkOption {
        type = types.int;
        default = 2 * 1024;
        description = lib.mdDoc ''
          Size of the swap partition, in megabytes.
        '';
      };
    };

    extraFirmwareConfig = mkOption {
      type = types.attrs;
      default = { };
      description = lib.mdDoc ''
        Extra configuration to be added to config.txt.
      '';
    };

  };

  config = {
    # Override of the sd image build to optionally add a swap partition
    system.build.sdImage = lib.mkForce (pkgs.callPackage
      ({ stdenv
       , dosfstools
       , e2fsprogs
       , mtools
       , libfaketime
       , util-linux
       , zstd
       }: stdenv.mkDerivation {
        name = config.sdImage.imageName;

        nativeBuildInputs = [ dosfstools e2fsprogs libfaketime mtools util-linux ]
          ++ lib.optional config.sdImage.compressImage zstd;

        inherit (config.sdImage) imageName compressImage;

        buildCommand = ''
          mkdir -p $out/nix-support $out/sd-image
          export img=$out/sd-image/${config.sdImage.imageName}

          echo "${pkgs.stdenv.buildPlatform.system}" > $out/nix-support/system
          if test -n "$compressImage"; then
            echo "file sd-image $img.zst" >> $out/nix-support/hydra-build-products
          else
            echo "file sd-image $img" >> $out/nix-support/hydra-build-products
          fi

          root_fs=${rootfsImage}
          ${lib.optionalString config.sdImage.compressImage ''
          root_fs=./root-fs.img
          echo "Decompressing rootfs image"
          zstd -d --no-progress "${rootfsImage}" -o $root_fs
          ''}

          # Set swap size. Set it to 0 it swap is disabled.
          swapSize=${toString (if config.sdImage.swap.enable then config.sdImage.swap.size else 0)}
          # The root partition is #2 if there is no swap, but is #3 is there is one
          rootPartitionNumber=${toString (if config.sdImage.swap.enable then 3 else 2)}

          # Gap in front of the first partition, in MiB
          gap=${toString config.sdImage.firmwarePartitionOffset}

          # Create the image file sized to fit /boot/firmware and /, plus slack for the gap.
          rootSizeBlocks=$(du -B 512 --apparent-size $root_fs | awk '{ print $1 }')
          firmwareSizeBlocks=$((${toString config.sdImage.firmwareSize} * 1024 * 1024 / 512))
          # Note: swap size is 0 if swap is disabled
          imageSize=$((rootSizeBlocks * 512 + firmwareSizeBlocks * 512 + gap * 1024 * 1024 + swapSize * 1024 * 1024))
          truncate -s $imageSize $img

          # type=b is 'W95 FAT32', type=82 is Swap, type=83 is 'Linux'.
          # The "bootable" partition is where u-boot will look file for the bootloader
          # information (dtbs, extlinux.conf file).

          sfdisk $img <<EOF
              label: dos
              label-id: ${config.sdImage.firmwarePartitionID}

              start=''${gap}M, size=$firmwareSizeBlocks, type=b
              ${lib.optionalString config.sdImage.swap.enable ''
              start=$((gap + ${toString config.sdImage.firmwareSize}))M, size=''${swapSize}M, type=82
              ''}
              start=$((gap + ${toString config.sdImage.firmwareSize} + swapSize))M, type=83, bootable
          EOF
          # Copy the rootfs into the SD image
          eval $(partx $img -o START,SECTORS --nr $rootPartitionNumber --pairs)
          dd conv=notrunc if=$root_fs of=$img seek=$START count=$SECTORS

          # * Create the swap if it is enabled
          ${lib.optionalString config.sdImage.swap.enable ''
          # Create the swap
          eval $(partx $img -o START,SECTORS --nr 2 --pairs)
          dd if=/dev/zero of=swap.img bs=''${swapSize}M count=1
          mkswap -L "${config.sdImage.swap.partitionName}" swap.img
          dd conv=notrunc if=swap.img of=$img seek=$START count=$SECTORS          
          ''} 

          # Create a FAT32 /boot/firmware partition of suitable size into firmware_part.img
          eval $(partx $img -o START,SECTORS --nr 1 --pairs)
          truncate -s $((SECTORS * 512)) firmware_part.img

          mkfs.vfat --invariant -i ${config.sdImage.firmwarePartitionID} -n ${config.sdImage.firmwarePartitionName} firmware_part.img

          # Populate the files intended for /boot/firmware
          mkdir firmware
          ${config.sdImage.populateFirmwareCommands}

          find firmware -exec touch --date=2000-01-01 {} +
          # Copy the populated /boot/firmware into the SD image
          cd firmware
          # Force a fixed order in mcopy for better determinism, and avoid file globbing
          for d in $(find . -type d -mindepth 1 | sort); do
            faketime "2000-01-01 00:00:00" mmd -i ../firmware_part.img "::/$d"
          done
          for f in $(find . -type f | sort); do
            mcopy -pvm -i ../firmware_part.img "$f" "::/$f"
          done
          cd ..

          # Verify the FAT partition before copying it.
          fsck.vfat -vn firmware_part.img
          dd conv=notrunc if=firmware_part.img of=$img seek=$START count=$SECTORS

          ${config.sdImage.postBuildCommands}

          if test -n "$compressImage"; then
              zstd -T$NIX_BUILD_CORES --rm $img
          fi
        '';
      })
      { });

    swapDevices = lib.mkIf config.sdImage.swap.enable [{
      device = "/dev/disk/by-label/${config.sdImage.swap.partitionName}";
    }];

    sdImage.populateFirmwareCommands = lib.mkIf ((lib.length (lib.attrValues config.sdImage.extraFirmwareConfig)) > 0)
      (
        let
          # Convert the set into a string of lines of "key=value" pairs.
          keyValueMap = name: value: name + "=" + toString value;
          keyValueList = lib.mapAttrsToList keyValueMap config.sdImage.extraFirmwareConfig;
          extraFirmwareConfigString = lib.concatStringsSep "\n" keyValueList;
        in
        lib.mkAfter
          ''
            config=firmware/config.txt
            # The initial file has just been created without write permissions. Add them to be able to append the file.
            chmod u+w $config
            echo "\n# Extra configuration" >> $config
            echo "${extraFirmwareConfigString}" >> $config
            chmod u-w $config
          ''
      );

    # Ugly hack to make it work with Pi Zero 2
    sdImage.populateRootCommands = lib.mkForce ''
      mkdir -p ./files/boot
      ${config.boot.loader.generic-extlinux-compatible.populateCmd} -c ${config.system.build.toplevel} -d ./files/boot
      DTBS_DIR=$(ls -d ./files/boot/nixos/*-dtbs)/broadcom
      chmod u+w $DTBS_DIR
      cp ${config.system.build.toplevel}/dtbs/broadcom/bcm2837-rpi-zero-2-w.dtb $DTBS_DIR/bcm2837-rpi-zero-2.dtb
      chmod u-w $DTBS_DIR
    '';

  };
}

I did not!

I did not!

I've changed https://gist.github.com/plmercereau/0c8e6ed376dc77617a7231af319e3d29#file-sd-image-nix-L13 to

  rootfsImage = pkgs.callPackage "${modulesPath}/../../nixos/lib/make-ext4-fs.nix" ({

You also need to make sure that modulesPath is added here https://gist.github.com/plmercereau/0c8e6ed376dc77617a7231af319e3d29#file-sd-image-nix-L8

Also, need to modify this line to also call modulesPath like so
https://gist.github.com/plmercereau/0c8e6ed376dc77617a7231af319e3d29#file-raspberry-pi-zero-2-nix-L4

    "${modulesPath}/installer/sd-card/sd-image-aarch64-installer.nix"

Then it's just a matter of adding a new nixosConfiguration

      nixosConfigurations = {
        // nixos-stable is the stable nixos channel input in my flake
        rpizero2wImage = nixos-stable.lib.nixosSystem {
          system = "aarch64-linux";
          // rpizero2w.nix is raspberry-pi-zero-2.nix from this gist
          modules = [ ./modules/arm/rpizero2w.nix ];
          
        };
};

Build using the following command. Drop -L if you don't want to see lots of logs scrolling on your screen.

nix build -L .#nixosConfigurations.rpizero2wImage.config.system.build.sdImage

That allowed me to build the image using flakes on my arm64 builder. I haven't tried booting it yet though, but at least it builds (:

Please see this flake example , and this comment

@plmercereau thanks so much! @jpraczyk I was so close! I figured it needed modulesPath but didn't have enough time to go the extra mile − many thanks for also working on it cc @sullyj3

Thanks very much!

For @sullyj3 @rjpcasalino and anyone else interested in related projects, I extended this project to implement several things:

• A custom kernel patch to enable USB host mode in the DTB
• A cross-compiled version to build on x86_64-linux systems
• Versions that work with both NixOS and Nix package manager on non-NixOS systems
• agenix encrypted secrets for the WiFi and admin user configuration
• Automation scripts to help build everything

You can check it out here:
https://github.com/pete3n/nix-pi/tree/main

Thanks for sharing this, Pete, that's a very inspiring repo. I wonder what and how we could submit upstream in order to simplify things a bit

this looks cool will def check it out when I've got time. Thanks @pete3n

Thanks, I hope you find it helpful. I have many projects involving different Raspberry Pis and other small board computers. As I get more proficient with Nix and build out my own library I will definitely look at submitting stuff upstream.

Nice! You both have a much better handle on nix lang than I do so I suggest looking into upstreaming stuff as soon as you can. https://github.com/samueldr seems to be a go to person for embedded stuff (check out https://github.com/Tow-Boot/Tow-Boot). I've started to wonder if there is a Raspberry Pi working group or some such. Anyway, please join https://discourse.nixos.org/ if you want. I'll share some of these links after I've played around with them so more. The community would love this stuff!