Mythic Fyrak macro guide - MD

fyrak.md

Mythic Fyrak Macro/WA Setup & Troubleshooting

The Macro - You probably already have this from Smolderon prog

Liquid

/run WeakAuras.ScanEvents("LIQUID_PRIVATE_AURA_MACRO", true)

NS

/run WeakAuras.ScanEvents("NS_PA_MACRO", true)

Bonus stuff

• Some people like including a Squeaky Bat use in their macro, so that you can see in logs when people pressed the macro.
  • The bats cost like 5-10k on the AH and are NOT consumed on use, so everyone in your raid only needs one.
  • This way, any casts of Squeaky Bat (179295) in logs would indicate a macro press.
  • Add this line to your macro - /use Squeaky Bat
• Some people also like to include a "use extra action button" line in their macro to free up a keybind. This means your p3 seed button would be the same as your macro button.
  • Add this line to your macro - /click ExtraActionButton1

Installation

Raid Leader needs:

1. Oi's Mythic Fyrak Macro Debugger
2. Octopals WA verifier

Everyone in the raid needs:

1. Octopals WA verifier client
2. Whatever WA Pack you've decided to use
   • Northern Sky
     • https://wago.io/AmirdrassilCustom
   • Liquid - EVERYONE NEEDS ALL 3
     • https://wago.io/LiquidAmirdrassil
     • https://wago.io/LiquidAnchors
     • https://wago.io/LiquidWeakAuras

Initial Setup

Raid Leader:

1. WA Verifier

• in custom options, add all of the WAs that everyone in your raid needs, plus any WAs you DONT want them to have (aberrus and vault WA packs)
  • Liquid WAs Example
    • Check WeakAura Versions text:
      • Liquid - Amirdrassil
      • Liquid Anchors (don't rename these)
      • LiquidWeakAuras
      • Liquid - Aberrus
      • Vault of the Incarnates
  • NS WAs Example
    • Check WeakAura Versions text:
      • Northern Sky Amirdrassil
• Note: also in custom options, can disable MRT addon version, WA version, BW version if you want to make the table narrower.
  • MRT Note checksum still valuable because everyone needs the same note for assignments to work.

2. Oi's WA

• read the description!
• you need to enable the correct aura for the WA pack you're using

Everyone

• Set a UNIQUE sound for all private auras
  • You want to build up the pavlovian response: When you hear this unique sound - press your macro.
  • These are the important private auras that require a macro press:
    1. Flamebound
    2. Molten Eruption
  • This is what it looks like when the aura sounds are configured correctly.
  • There are ways to configure this without the Liquid Anchors aura, but I'm not familiar with them. I believe Reloe's aura pack uses a similar concept.

Raid night before you pull

• RL types /waaudit to open WA auditor.
  • Will show a big table of everyones installed WAs and their versions.
  • Red numbers mean their version differs from yours
• If everyone is green, you are probably good to pull.

To test macros

1. When you test the macros depends on which WA you are using.
   • If using the Liquid auras, have all 20 people press their macros immediately on pull, then jump off the edge.
   • If using NS auras, you need to wait until P2 starts, have all 20 people press their macros, then jump off.
2. Oi's Fyrak Macro troubleshooter WA should be populated with a list of everyone who pressed their macro.

• Anyone who isnt present in the list didnt press or has a config issue.

Using the Liquid WA pack and the macro isn't working for a few people despite them being all green in the verifier?

• Common issue with the liquid pack is a duplicate LiquidWeakAuras aura.
• Have anyone who didnt show up in the list send a screenshot of them searching their auras for "liquidweak": Like this
  • There should be only one result.
  • More than 1 result means they have conflicting auras. Remove everything but the standalone LiquidWeakAuras aura.