Skip to content

Instantly share code, notes, and snippets.

@zvldz

zvldz/soft_hack.md

Last active December 9, 2024 19:35
Show Gist options
  • Save zvldz/1bd6b21539f84339c218f9427e022709 to your computer and use it in GitHub Desktop.
Save zvldz/1bd6b21539f84339c218f9427e022709 to your computer and use it in GitHub Desktop.
Download ZIP
soft_hack.md
Raw
soft_hack.md

Soft hack to open telnet

You need gateway 3(mgl03) connected to MiHome. And also ip and gateway token.

1 way (recommended)

Via XiaomiGateway3 component.

You must input in the 'Open Telnet command' field(as it is without changing anything):

{"method":"set_ip_info","params":{"ssid":"\"\"","pswd":"123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd"}}

2 way (recommended if not using Home Assistant)

php-miio (https://github.com/skysilver-lab/php-miio)

You may need to change id.

php miio-cli.php --ip GW_IP --token GW_TOKEN --sendcmd '{"id":123,"method":"set_ip_info","params":{"ssid":"\"\"","pswd":"123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd"}}'

3 way (maybe problem with sequence id)

python-miio (https://github.com/rytilahti/python-miio)

miiocli device --ip GW_IP --token GW_TOKEN raw_command set_ip_info '{"ssid":"\"\"","pswd":"123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd"}'

Login: admin

Password is empty

After opening telnet, it is better to install custom firmware (only for Xiaomi Gateway 3 mgl03).

Read here: https://github.com/zvldz/mgl03_fw/tree/main/firmware#the-easy-way

Open telnet command should also work with:

  • lumi.gateway.mgl03 - Mi Smart Home Hub
  • lumi.gateway.acn01 - Aqara Hub M1S CN
  • lumi.gateway.aeu01 - Aqara Hub M1S EU
  • lumi.aircondition.acn05 - Aqara Air Conditioning Controller P3
  • lumi.gateway.sacn01 - Smart USB Wall Outlet Hub

Aqara Hub E1 (ZHWG16LM usb stick)

You need gateway E1 connected to MiHome. And also ip and gateway token.

1 way (recommended)

Via XiaomiGateway3 component, version 2+.

You must input in the 'Open Telnet command' field(as it is without changing anything):

{"method":"set_ip_info","params":{"ssid":"\"\"","pswd":"123123 ; /bin/riu_w 101e 53 3012; telnetd"}}

2 way (recommended if not using Home Assistant)

php-miio (https://github.com/skysilver-lab/php-miio)

You may need to change id.

php miio-cli.php --ip GW_IP --token GW_TOKEN --sendcmd '{"id":123,"method":"set_ip_info","params":{"ssid":"\"\"","pswd":"123123 ; /bin/riu_w 101e 53 3012; telnetd"}}'

3 way (maybe problem with sequence id)

python-miio (https://github.com/rytilahti/python-miio)

miiocli device --ip GW_IP --token GW_TOKEN raw_command set_ip_info '{"ssid":"\"\"","pswd":"123123 ;  /bin/riu_w 101e 53 3012 ; telnetd"}'

Login: root

Password is empty

I am not author, I just tested and improved and published.

Enable telnet on Aqara G3 hub

@zvldz
Copy link
Author

zvldz commented Feb 9, 2022 •
edited
Loading

Aqara M1S 2022 cannot integrated to HA?

I don't know.
look here https://github.com/niceboygithub/AqaraGateway

@Haldyz
Copy link

Haldyz commented Mar 7, 2022

hi. thx for the guide. i have telnet access to my GW, but I would like to access also the sdcard via telnet/ssh. is there any way to do that?

@xquyan
Copy link

xquyan commented Mar 30, 2022

1 way and 3 way not working on lumi.aircondition.acn05 firmware 4.0.1_0001, result says

ERROR:miio.miioprotocol:Got error when receiving: timed out
Error: No response from the device

what can I do?

@alirezadigi
Copy link

alirezadigi commented Apr 16, 2022 •
edited
Loading

same problem like @xquyan

@xquyan wrong token was the problem ...

@xquyan
Copy link

xquyan commented Apr 16, 2022

same problem like @xquyan

@xquyan wrong token was the problem ...

My problem turned out to be a python problem, tried on another device that can run python properly and it worked out. Couldn't figure out what's wrong with my python install tho

@kingwap99
Copy link

kingwap99 commented May 3, 2022 •
edited
Loading

For Aqara M1S 2022,

php miio-cli.php --ip GW_IP --token GW_TOKEN --sendcmd '{"id":123,"method":"set_ip_info","params":{"ssid":"\"\"","pswd":"123123 ; passwd -d root ; /bin/riu_w 101e 53 3012; telnetd"}}'

thanks, it worked, but why this script cannot work well

Flash M1S Custom firmware method
cd /tmp && wget -O /tmp/curl "http://master.dl.sourceforge.net/project/mgl03/bin/curl?viasf=1" && chmod a+x /tmp/curl
/tmp/curl -s -k -L -o /tmp/m1s_update.sh https://raw.githubusercontent.com/niceboygithub/AqaraM1SM2fw/main/modified/M1S/m1s_update.sh
chmod a+x /tmp/m1s_update.sh && /tmp/m1s_update.sh

/tmp/curl: line 1: syntax error: unexpected "("

@zvldz
Copy link
Author

zvldz commented May 3, 2022

thanks, it worked, but why this script cannot work well

mgl03 and m1s have different processor architectures, so on m1s do not work binaries used for mgl03

@vinter-wu
Copy link

What is the reason?
PS C:\Users\Administrator\Desktop\python-miio-master> miiocli device --ip 192.168.2.174 --token 455155476f71697552 raw_command set_ip_info '{"ssid":"""","pswd":"123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd"}'
Traceback (most recent call last):
File "C:\Users\Administrator\AppData\Local\pypoetry\Cache\virtualenvs\python-miio-6Z4gUOLp-py3.8\Scripts\miiocli", line 5, in
create_cli()
File "C:\Users\Administrator\Desktop\python-miio-master\miio\cli.py", line 63, in create_cli
return cli(auto_envvar_prefix="MIIO")
File "C:\Users\Administrator\Desktop\python-miio-master\miio\click_common.py", line 51, in call
return self.main(*args, **kwargs)
File "C:\Users\Administrator\AppData\Local\pypoetry\Cache\virtualenvs\python-miio-6Z4gUOLp-py3.8\lib\site-packages\click\core.py", line 1055, in main
rv = self.invoke(ctx)
File "C:\Users\Administrator\AppData\Local\pypoetry\Cache\virtualenvs\python-miio-6Z4gUOLp-py3.8\lib\site-packages\click\core.py", line 1657, in invoke
return _process_result(sub_ctx.command.invoke(sub_ctx))
File "C:\Users\Administrator\AppData\Local\pypoetry\Cache\virtualenvs\python-miio-6Z4gUOLp-py3.8\lib\site-packages\click\core.py", line 1655, in invoke
sub_ctx = cmd.make_context(cmd_name, args, parent=ctx)
File "C:\Users\Administrator\AppData\Local\pypoetry\Cache\virtualenvs\python-miio-6Z4gUOLp-py3.8\lib\site-packages\click\core.py", line 920, in make_context
self.parse_args(ctx, args)
File "C:\Users\Administrator\AppData\Local\pypoetry\Cache\virtualenvs\python-miio-6Z4gUOLp-py3.8\lib\site-packages\click\core.py", line 1378, in parse_args
value, args = param.handle_parse_result(ctx, opts, args)
File "C:\Users\Administrator\AppData\Local\pypoetry\Cache\virtualenvs\python-miio-6Z4gUOLp-py3.8\lib\site-packages\click\core.py", line 2360, in handle_parse_result
value = self.process_value(ctx, value)
File "C:\Users\Administrator\AppData\Local\pypoetry\Cache\virtualenvs\python-miio-6Z4gUOLp-py3.8\lib\site-packages\click\core.py", line 2316, in process_value
value = self.type_cast_value(ctx, value)
File "C:\Users\Administrator\AppData\Local\pypoetry\Cache\virtualenvs\python-miio-6Z4gUOLp-py3.8\lib\site-packages\click\core.py", line 2304, in type_cast_value
return convert(value)
File "C:\Users\Administrator\AppData\Local\pypoetry\Cache\virtualenvs\python-miio-6Z4gUOLp-py3.8\lib\site-packages\click\types.py", line 82, in call
return self.convert(value, param, ctx)
File "C:\Users\Administrator\Desktop\python-miio-master\miio\click_common.py", line 99, in convert
return ast.literal_eval(value)
File "c:\users\administrator\appdata\local\programs\python\python38-32\lib\ast.py", line 59, in literal_eval
node_or_string = parse(node_or_string, mode='eval')
File "c:\users\administrator\appdata\local\programs\python\python38-32\lib\ast.py", line 47, in parse
return compile(source, filename, mode, flags,
File "", line 1
{ssid:"",pswd:123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd}
^
SyntaxError: invalid syntax
PS C:\Users\Administrator\Desktop\python-miio-master> miiocli device --ip 192.168.2.174 --token 45515547626143726f5a736f71697552 info
Model: lumi.gateway.acn01
Hardware version: Linux
Firmware version: 4.0.1_0026

@brainb203
Copy link

SyntaxError: invalid decimal literal
image

can any body help?

@aminhusni
Copy link

Anybody has an idea on how do I set or change password for Telnet?
Feels insecure when there is no password at all.

@niceboygithub
Copy link

niceboygithub commented Sep 11, 2022 •
edited
Loading

Mi Smart Hub 2 Pro (ZHWG16LM, Multimode Gateway 2)
You need multimode gateway 2 connected to MiHome. And also ip and gateway token.

1 way (recommended)
Via XiaomiGateway3 component, version 2+.

You must input in the 'Open Telnet command' field(as it is without changing anything):

{"method":"set_ip_info","params":{"ssid":"\"\"","pswd":"123123 ; passwd -d root; /bin/riu_w 101e 53 3012; telnetd"}}

2 way (recommended if not using Home Assistant)
php-miio (https://github.com/skysilver-lab/php-miio)

You may need to change id.

php miio-cli.php --ip GW_IP --token GW_TOKEN --sendcmd '{"id":123,"method":"set_ip_info","params":{"ssid":"\"\"","pswd":"123123 ; passwd -d root; /bin/riu_w 101e 53 3012; telnetd"}}'

3 way (maybe problem with sequence id)
python-miio (https://github.com/rytilahti/python-miio)

miiocli device --ip GW_IP --token GW_TOKEN raw_command set_ip_info '{"ssid":"\"\"","pswd":"123123 ;  passwd -d root; /bin/riu_w 101e 53 3012 ; telnetd"}'

Login: root

Password is empty

@Djeloan
Copy link

Djeloan commented Sep 13, 2022 •
edited
Loading

After typing command:
miiocli device --ip GW_IP --token GW_TOKEN raw_command set_ip_info '{"ssid":"\"\"","pswd":"123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd"}'

I get this error:

Running command raw_command
ERROR:miio.miioprotocol:Got error when receiving: {'code': -9999, 'message': 'user ack timeout'}
Error: Unable to recover failed command

Im trying it on lumi.gateway.acn01 (M1S)

@y306702588
Copy link

After typing command:
miiocli device --ip 192.168.124.20 --token GW_TOKEN raw_command set_ip_info '{"ssid":"""","pswd":"123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd"}'

I get this error:

C:>miiocli device --ip 192.168.124.20 --token 514fxxxx6779396xxxx943393xxxx04b
info
Model: lumi.gateway.acn01
Hardware version: Linux
Firmware version: 3.1.3_0002

C:>miiocli device --ip 192.168.124.20 --token 514fxxxx6779396xxxx943393xxxx04b
raw_command set_ip_info '{"ssid":"""","pswd":"123123 ; passwd -d admin ; echo
enable > /sys/class/tty/tty/enable; telnetd"}'
Running command raw_command
ERROR:miio.miioprotocol:Got error when receiving: timed out
Error: No response from the device

C:>

@Pedrocomp
Copy link

Hello, I'm having trouble adding my gateway, I can not open Telnet, can anyone help

@mcdona1d
Copy link

Hello, I'm having trouble adding my gateway, I can not open Telnet, can anyone help

same issue, firmware:3.4.8

log:
Running command raw_command
ERROR:miio.miioprotocol:Got error when receiving: {'code': -9999, 'message': 'user ack timeout'}

@mcdona1d
Copy link

Good News !

2 Way is work for 3.4.8 !

@lowo56
Copy link

lowo56 commented Dec 3, 2022

Is there a way to reverse the firmware lock on Chinese Gateway ZNDMWG03LM?
Reason is i want to give the gateway to someone else who doesn't uses Home Assistant.
I own several of these gateways and can spare one for a friend but he want the gateway te be able to update the firmware.

btw: using the slider in HA doesn't reverse the gatewaylock on my gateways!

@xorxorxorxor
Copy link

Error Infomation

Error: No response from the device

Device Information

Model: lumi.gateway.acn01
Hardware version: Linux
Firmware version: 4.0.1_0002

How it happens?

  1. use miiocli to open the telnetd.
    miiocli -d device --ip 192.168.2.105 --token TOKEN raw_command set_ip_info '{"ssid":"\"\"","pswd":"123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd"}'

  2. the result is below:

    INFO:miio.cli:Debug mode active
    Running command raw_command
    DEBUG:miio.click_common:Unknown model, trying autodetection. None None
    DEBUG:miio.miioprotocol:Got a response: Container:
    data = Container:
    data = b'' (total 0)
    value = b'' (total 0)
    offset1 = 32
    offset2 = 32
    length = 0
    header = Container:
    data = b'!1\x00 \x00\x00\x00\x00\x1d\xbd\xc7\xe1c\xc0\n\xbd' (total 16)
    value = Container:
    length = 32
    unknown = 0
    device_id = unhexlify('1dbdc7e1')
    ts = 2023-01-12 13:27:25
    offset1 = 0
    offset2 = 16
    length = 16
    checksum = b'\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff' (total 16)
    DEBUG:miio.miioprotocol:Discovered 1dbdc7e1 with ts: 2023-01-12 13:27:25, token: b'ffffffffffffffffffffffffffffffff'
    DEBUG:miio.miioprotocol:192.168.2.105:54321 >>: {'id': 1, 'method': 'miIO.info', 'params': []}
    DEBUG:miio.miioprotocol:Retrying with incremented id, retries left: 3
    DEBUG:miio.miioprotocol:Got a response: Container:
    data = Container:
    data = b'' (total 0)
    value = b'' (total 0)
    offset1 = 32
    offset2 = 32
    length = 0
    header = Container:
    data = b'!1\x00 \x00\x00\x00\x00\x1d\xbd\xc7\xe1c\xc0\n\xc2' (total 16)
    value = Container:
    length = 32
    unknown = 0
    device_id = unhexlify('1dbdc7e1')
    ts = 2023-01-12 13:27:30
    offset1 = 0
    offset2 = 16
    length = 16
    checksum = b'\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff' (total 16)
    DEBUG:miio.miioprotocol:Discovered 1dbdc7e1 with ts: 2023-01-12 13:27:30, token: b'ffffffffffffffffffffffffffffffff'
    DEBUG:miio.miioprotocol:192.168.2.105:54321 >>: {'id': 102, 'method': 'miIO.info', 'params': []}
    DEBUG:miio.miioprotocol:Retrying with incremented id, retries left: 2
    DEBUG:miio.miioprotocol:Got a response: Container:
    data = Container:
    data = b'' (total 0)
    value = b'' (total 0)
    offset1 = 32
    offset2 = 32
    length = 0
    header = Container:
    data = b'!1\x00 \x00\x00\x00\x00\x1d\xbd\xc7\xe1c\xc0\n\xc7' (total 16)
    value = Container:
    length = 32
    unknown = 0
    device_id = unhexlify('1dbdc7e1')
    ts = 2023-01-12 13:27:35
    offset1 = 0
    offset2 = 16
    length = 16
    checksum = b'\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff' (total 16)
    DEBUG:miio.miioprotocol:Discovered 1dbdc7e1 with ts: 2023-01-12 13:27:35, token: b'ffffffffffffffffffffffffffffffff'
    DEBUG:miio.miioprotocol:192.168.2.105:54321 >>: {'id': 203, 'method': 'miIO.info', 'params': []}
    DEBUG:miio.miioprotocol:192.168.2.105:54321 (ts: 2023-01-12 13:27:35, id: 203) << {'partner_id': '', 'id': 203, 'code': 0, 'message': 'ok', 'result': {'hw_ver': 'Linux', 'fw_ver': '4.0.1_0002', 'mcu_fw_ver': '0616', 'ap': {'ssid': 'TP-LINK_774A', 'bssid': '60:45:3b:68:4a:93', 'rssi': '-32', 'freq': '2432'}, 'netif': {'localIp': '192.168.2.105', 'mask': '255.255.255.0', 'gw': '192.168.2.1'}, 'model': 'lumi.gateway.acn01', 'mac': '54:EF:43:40:D5:13', 'token': 'TOKEN', 'life': 4473}}
    DEBUG:miio.device:Detected model lumi.gateway.acn01
    DEBUG:miio.miioprotocol:192.168.2.105:54321 >>: {'id': 204, 'method': 'set_ip_info', 'params': '{ssid:"",pswd:123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd}'}
    DEBUG:miio.miioprotocol:Retrying with incremented id, retries left: 3
    DEBUG:miio.miioprotocol:Got a response: Container:
    data = Container:
    data = b'' (total 0)
    value = b'' (total 0)
    offset1 = 32
    offset2 = 32
    length = 0
    header = Container:
    data = b'!1\x00 \x00\x00\x00\x00\x1d\xbd\xc7\xe1c\xc0\n\xcc' (total 16)
    value = Container:
    length = 32
    unknown = 0
    device_id = unhexlify('1dbdc7e1')
    ts = 2023-01-12 13:27:40
    offset1 = 0
    offset2 = 16
    length = 16
    checksum = b'\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff' (total 16)
    DEBUG:miio.miioprotocol:Discovered 1dbdc7e1 with ts: 2023-01-12 13:27:40, token: b'ffffffffffffffffffffffffffffffff'
    DEBUG:miio.miioprotocol:192.168.2.105:54321 >>: {'id': 305, 'method': 'set_ip_info', 'params': '{ssid:"",pswd:123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd}'}
    DEBUG:miio.miioprotocol:Retrying with incremented id, retries left: 2
    DEBUG:miio.miioprotocol:Got a response: Container:
    data = Container:
    data = b'' (total 0)
    value = b'' (total 0)
    offset1 = 32
    offset2 = 32
    length = 0
    header = Container:
    data = b'!1\x00 \x00\x00\x00\x00\x1d\xbd\xc7\xe1c\xc0\n\xd1' (total 16)
    value = Container:
    length = 32
    unknown = 0
    device_id = unhexlify('1dbdc7e1')
    ts = 2023-01-12 13:27:45
    offset1 = 0
    offset2 = 16
    length = 16
    checksum = b'\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff' (total 16)
    DEBUG:miio.miioprotocol:Discovered 1dbdc7e1 with ts: 2023-01-12 13:27:45, token: b'ffffffffffffffffffffffffffffffff'
    DEBUG:miio.miioprotocol:192.168.2.105:54321 >>: {'id': 406, 'method': 'set_ip_info', 'params': '{ssid:"",pswd:123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd}'}
    DEBUG:miio.miioprotocol:Retrying with incremented id, retries left: 1
    DEBUG:miio.miioprotocol:Got a response: Container:
    data = Container:
    data = b'' (total 0)
    value = b'' (total 0)
    offset1 = 32
    offset2 = 32
    length = 0
    header = Container:
    data = b'!1\x00 \x00\x00\x00\x00\x1d\xbd\xc7\xe1c\xc0\n\xd6' (total 16)
    value = Container:
    length = 32
    unknown = 0
    device_id = unhexlify('1dbdc7e1')
    ts = 2023-01-12 13:27:50
    offset1 = 0
    offset2 = 16
    length = 16
    checksum = b'\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff' (total 16)
    DEBUG:miio.miioprotocol:Discovered 1dbdc7e1 with ts: 2023-01-12 13:27:50, token: b'ffffffffffffffffffffffffffffffff'
    DEBUG:miio.miioprotocol:192.168.2.105:54321 >>: {'id': 507, 'method': 'set_ip_info', 'params': '{ssid:"",pswd:123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd}'}
    ERROR:miio.miioprotocol:Got error when receiving: timed out
    DEBUG:miio.click_common:Exception: No response from the device
    Traceback (most recent call last):
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\miio\miioprotocol.py", line 193, in send
    data, addr = s.recvfrom(4096)
    socket.timeout: timed out

    During handling of the above exception, another exception occurred:

    Traceback (most recent call last):
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\miio\miioprotocol.py", line 193, in send
    data, addr = s.recvfrom(4096)
    socket.timeout: timed out

    During handling of the above exception, another exception occurred:

    Traceback (most recent call last):
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\miio\miioprotocol.py", line 193, in send
    data, addr = s.recvfrom(4096)
    socket.timeout: timed out

    During handling of the above exception, another exception occurred:

    Traceback (most recent call last):
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\miio\miioprotocol.py", line 193, in send
    data, addr = s.recvfrom(4096)
    socket.timeout: timed out

    The above exception was the direct cause of the following exception:

    Traceback (most recent call last):
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\miio\click_common.py", line 51, in call
    return self.main(*args, **kwargs)
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\click\core.py", line 1055, in main
    rv = self.invoke(ctx)
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\click\core.py", line 1657, in invoke
    return _process_result(sub_ctx.command.invoke(sub_ctx))
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\click\core.py", line 1657, in invoke
    return _process_result(sub_ctx.command.invoke(sub_ctx))
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\click\core.py", line 1404, in invoke
    return ctx.invoke(self.callback, **ctx.params)
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\click\core.py", line 760, in invoke
    return __callback(*args, **kwargs)
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\miio\click_common.py", line 305, in wrap
    kwargs["result"] = func(*args, **kwargs)
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\click\decorators.py", line 84, in new_func
    return ctx.invoke(f, obj, *args, **kwargs)
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\click\core.py", line 760, in invoke
    return __callback(*args, **kwargs)
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\miio\click_common.py", line 270, in command_callback
    return miio_command.call(miio_device, *args, **kwargs)
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\miio\click_common.py", line 217, in call
    return method(*args, **kwargs)
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\miio\click_common.py", line 184, in _wrap
    return func(self, *args, **kwargs)
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\miio\device.py", line 126, in raw_command
    return self.send(command, parameters)
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\miio\device.py", line 108, in send
    command, parameters, retry_count, extra_parameters=extra_parameters
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\miio\miioprotocol.py", line 237, in send
    extra_parameters=extra_parameters,
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\miio\miioprotocol.py", line 237, in send
    extra_parameters=extra_parameters,
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\miio\miioprotocol.py", line 237, in send
    extra_parameters=extra_parameters,
    File "D:\ProgramFiles\anaconda\envs\miio\lib\site-packages\miio\miioprotocol.py", line 241, in send
    raise DeviceException("No response from the device") from ex
    miio.exceptions.DeviceException: No response from the device
    Error: No response from the device

@aminhusni
Copy link

Telnet cannot be enabled for version:
Version 4.0.1_0022.0642

ERROR:miio.miioprotocol:Unable to discover a device at address 192.168.0.187

The device is connected to the network and is alive.

Trying 192.168.0.187...
telnet: Unable to connect to remote host: Connection refused

The only way to enable Telnet is to flash custom firmware via serial port.
https://github.com/niceboygithub/AqaraM1SM2fw/

@netdoggy
Copy link

Note
Model: lumi.gateway.mgl03

Under Windows python and python-miio
there I was an error: {'code': -9999, 'message': 'user ack timeout'}

The problem was solved when I tried the same thing but under WSL(Ubuntu)

@ddpsft
Copy link

ddpsft commented Nov 17, 2023

Trying to make it work but I'm not able to get it. My fw version is to old and I've tried to use the code shown in the image and also serrj_sv's way (https://community.home-assistant.io/t/xiaomi-mijia-smart-multi-mode-gateway-zndmwg03lm-support/159586/61). The code shown in the image get no response. The later returns ok, but still unable to telnet (asks for password). Any ideas?

image

Also, the first method shown here isn't possible
image

@wizardofozzie
Copy link

Aqara G3 Hub (lumi.camera.gwpagl01) https://github.com/Wh1terat/aQRootG3

@Wh1terat I'm trying to get your code working. I make the QR code, scan it with camera, all good to this point. After it fails, what specifically do I do? Reset the camera and add to Aqara app? fill in ssid/pwd in app and then use camera to scan legit QR code? thanks

@Wh1terat
Copy link

@Wh1terat I'm trying to get your code working. I make the QR code, scan it with camera, all good to this point. After it fails, what specifically do I do? Reset the camera and add to Aqara app? fill in ssid/pwd in app and then use camera to scan legit QR code? thanks

No need to reset the camera, just try to add it to the app with a legit QR code. Be aware most firmwares for the last year or two have been patched and are no longer vulnerable. There are methods to downgrade.

@wizardofozzie
Copy link

I got lucky! I got the firmware that works
It must be working because I can use the G3 in Home Assistant
Is there a way to downgrade G2H Pro firmware?

@Wh1terat
Copy link

@wizardofozzie niceboygithub/AqaraGateway#179

@wizardofozzie
Copy link

@wizardofozzie niceboygithub/AqaraGateway#179

@Wh1terat that's crazy- thanks so much!

For G2hPro, I have downgraded to firmware 3.3.4 but telnet won't work. I booted an SD with custom firmware onto the camera but telnet 192.168.1.101 is refused. Any ideas?

@bmwcar
Copy link

bmwcar commented Feb 15, 2024

@wizardofozzie niceboygithub/AqaraGateway#179

@Wh1terat that's crazy- thanks so much!

For G2hPro, I have downgraded to firmware 3.3.4 but telnet won't work. I booted an SD with custom firmware onto the camera but telnet 192.168.1.101 is refused. Any ideas?

i think the new g2h pro camera fix the bug ,so you can not use telnet. Because my g2h pro can use telnet.

@superclaw
Copy link

Is there any solution for lumi.gateway.mgl001?

@dportabella
Copy link

what can be the problem?

$ GW_IP=192.168...
$ GW_TOKEN=32414f48...
$ miiocli device --ip $GW_IP --token $GW_TOKEN info
Model: lumi.gateway.acn008
Hardware version: Linux
Firmware version: 4.0.5_0005

$ miiocli device --ip $GW_IP --token $GW_TOKEN raw_command set_ip_info '{"ssid":"\"\"","pswd":"123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd"}'
Running command raw_command
ERROR:miio.miioprotocol:Got error when receiving: {'code': -9999, 'message': 'user ack timeout'}
Error: Unable to recover failed command

$ php miio-cli.php --ip $GW_IP --token $GW_TOKEN --sendcmd '{"id":123,"method":"set_ip_info","params":{"ssid":"\"\"","pswd":"123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd"}}'
PHP Deprecated:  Creation of dynamic property miIO::$bind_ip is deprecated in /php-miio/miio.class.php on line 51

Deprecated: Creation of dynamic property miIO::$bind_ip is deprecated in /php-miio/miio.class.php on line 51
Устройство 192.168.130.181 доступно и ответило:
{"id":123,"error":{"code":-9999,"message":"user ack timeout"},"exe_time":4000}

@ASDBigmac
Copy link

Seemingly the Info for 1.5.5_0006 is wrong. I got in without UART by executing the commands and later login via admin/admin

$ miiocli device --ip 10.0.x.x --token 445159xxxx raw_command set_ip_info '{"ssid":"""","pswd":"123123 ; /bin/riu_w 101e 53 3012 ; telnetd"}'
Running command raw_command
ERROR:miio.miioprotocol:Got error when receiving: {'code': -9999, 'message': 'user ack timeout'}
Error: Unable to recover failed command

$ miiocli device --ip 10.0.x.x --token 445159xxxx raw_command set_ip_info '{"ssid":"""","pswd":"123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd"}'
Running command raw_command
ERROR:miio.miioprotocol:Got error when receiving: {'code': -9999, 'message': 'user ack timeout'}
Error: Unable to recover failed command

$ telnet 10.0.x.x
Trying 10.0.x.x...
Connected to 10.0.x.x.
Escape character is '^]'.

rlxlinux login: admin
Password:
Login incorrect
rlxlinux login: admin
Password:
Lumi Linux version 3.0

| | || | |||
| | _ _ _____ _ | | _ ____ _ _ _ _
| || || || | | | || | _ | | | |\ / /
| || || || | | || | | || | | | | || |/
||_||||||| ||||| ||___|_/_/

For further information check:
https://www.aqara.com

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment