express-static-server.js

// only for Angular2 dist
//
// # SimpleServer
//
// A simple chat server using Socket.IO, Express, and Async.
//
var http = require('http');
var path = require('path');

var async = require('async');
var socketio = require('socket.io');
var express = require('express');

//
// ## SimpleServer `SimpleServer(obj)`
//
// Creates a new instance of SimpleServer with the following options:
//  * `port` - The HTTP port to listen on. If `process.env.PORT` is set, _it overrides this value_.
//
var router = express();
var server = http.createServer(router);
var io = socketio.listen(server);

router.use(express.static(path.resolve(__dirname, 'dist')));
var messages = [];
var sockets = [];

io.on('connection', function (socket) {
    messages.forEach(function (data) {
      socket.emit('message', data);
    });

    sockets.push(socket);

    socket.on('disconnect', function () {
      sockets.splice(sockets.indexOf(socket), 1);
      updateRoster();
    });

    socket.on('message', function (msg) {
      var text = String(msg || '');

      if (!text)
        return;

      socket.get('name', function (err, name) {
        var data = {
          name: name,
          text: text
        };

        broadcast('message', data);
        messages.push(data);
      });
    });

    socket.on('identify', function (name) {
      socket.set('name', String(name || 'Anonymous'), function (err) {
        updateRoster();
      });
    });
  });

function updateRoster() {
  async.map(
    sockets,
    function (socket, callback) {
      socket.get('name', callback);
    },
    function (err, names) {
      broadcast('roster', names);
    }
  );
}

function broadcast(event, data) {
  sockets.forEach(function (socket) {
    socket.emit(event, data);
  });
}

server.listen(process.env.PORT || 3000, process.env.IP || "0.0.0.0", function(){
  var addr = server.address();
  console.log("Chat server listening at", addr.address + ":" + addr.port);
});

0.0.0.0 => 127.0.0.1

https://en.wikipedia.org/wiki/0.0.0.0

http://www.howtogeek.com/225487/what-is-the-difference-between-127.0.0.1-and-0.0.0.0/

在因特网协议版本4中，地址0.0.0.0是用于指定无效，未知或不适用的目标的不可路由的元地址。

我们大多数人听说过'127.0.0.1和0.0.0.0'，但是可能没有给他们太多的思考，但如果两者实际上似乎指向相同的位置，那么两者之间的实际差异是什么？

What is the Difference Between 127.0.0.1 and 0.0.0.0?

127.0.0.1 is the loopback address (also known as localhost).
0.0.0.0 is a non-routable meta-address used to designate an invalid, unknown, or non-applicable target (a ‘no particular address’ place holder).
In the context of a route entry, it usually means the default route.

In the context of servers, 0.0.0.0 means all IPv4 addresses on the local machine. If a host has two IP addresses, 192.168.1.1 and 10.1.2.1, and a server running on the host listens on 0.0.0.0, it will be reachable at both of those IPs.

What is the IP Address 127.0.0.1?

127.0.0.1 is the loopback Internet protocol (IP) address also referred to as the localhost. The address is used to establish an IP connection to the same machine or computer being used by the end-user.

The same convention is defined for computers that support IPv6 addressing using the connotation of ::1. Establishing a connection using the address 127.0.0.1 is the most common practice; however, using any IP address in the range of 127…* will function in the same or a similar manner. The loopback construct gives a computer or device capable of networking the capability to validate or establish the IP stack on the machine.

Source: 127.0.0.1 – What Are its Uses and Why is it Important?

Special Addresses

The class A network number 127 is assigned the loopback function, that is, a datagram sent by a higher level protocol to a network 127 address should loop back inside the host. No datagram sent to a network 127 address should ever appear on any network anywhere.

Source: Network Numbers

If it is Whole Class A, What is the Point of Other Arbitrary Values for the Last Three Octets?

The purpose of the loopback range is testing of the TCP/IP protocol implementation on a host. Since the lower layers are short-circuited, sending to a loopback address allows the higher layers (IP and above) to be effectively tested without the chance of problems at the lower layers manifesting themselves. 127.0.0.1 is the address most commonly used for testing purposes.

Source: IP Reserved, Loopback and Private Addresses

For more information see the Ask Ubuntu question: What is the Loopback Device and How do I Use it?

What is the IP Address 0.0.0.0?

0.0.0.0 is a valid address syntax. So it should parse as valid wherever an IP address in traditional dotted-decimal notation is expected. Once parsed and converted to workable numeric form, then its value determines what happens next.

The all-zero value does have a special meaning. So it is valid, but has a meaning that may not be appropriate (and thus treated as not valid) for particular circumstances. It is basically the ‘no particular address’ placeholder. For things like address binding of network connections, the result can be to assign an appropriate interface address to the connection. If you are using it to configure an interface, it can instead remove an address from the interface. It depends on the context of use to determine what ‘no particular address’ really does.

In the context of a route entry, it usually means the default route. That happens as a result more of the address mask, which selects the bits to compare. A mask of 0.0.0.0 selects no bits, so the comparison will always succeed. So when such a route is configured, there is always somewhere for packets to go (if configured with a valid destination).

In some cases, merely ‘0’ will also work and have the same effect. But this is not guaranteed. The 0.0.0.0 form is the standard way to say ‘no particular address’ (in IPv6 that is ::0 or just ::).

Source: What is the Meaning of the IP Address 0.0.0.0?

In Internet Protocol version 4, the address 0.0.0.0 is a non-routable meta-address used to designate an invalid, unknown, or non applicable target. To give a special meaning to an otherwise invalid piece of data is an application of in-band signaling.

In the context of servers, 0.0.0.0 means all IPv4 addresses on the local machine. If a host has two IP addresses, 192.168.1.1 and 10.1.2.1, and a server running on the host listens on 0.0.0.0, it will be reachable at both of those IPs (Note: This particular text is repeated from above as part of the overall answer).

In the context of routing, 0.0.0.0 usually means the default route, i.e. the route which leads to ‘the rest of’ the Internet instead of somewhere on the local network.

Uses Include:

The address a host claims as its own when it has not yet been assigned an address. Such as when sending the initial DHCPDISCOVER packet when using DHCP.
The address a host assigns to itself when an address request via DHCP has failed, provided the host’s IP stack supports this. This usage has been replaced with the APIPA mechanism in modern operating systems.
A way to specify any IPv4-host at all. It is used in this way when specifying a default route.
A way to explicitly specify that the target is unavailable. Source: 127.0.0.1 – What Are its Uses and Why is it Important?
A way to specify any IPv4 address at all. It is used in this way when configuring servers (i.e. when binding listening sockets). This is known to TCP programmers as INADDR_ANY. [bind(2) binds to addresses, not interfaces.]
In IPv6, the all-zeros-address is written as ::

Source: 0.0.0.0 [Wikipedia]

DHCP Discovery/Request

When a client boots up for the first time, it is said to be in the initializing state, and transmits a DHCPDISCOVER message on its local physical subnet over User Datagram Protocol (UDP) port 67 (BootP server). Since the client has no way of knowing the subnet to which it belongs, the DHCPDISCOVER is an all subnets broadcast (destination IP address of 255.255.255.255), with a source IP address of 0.0.0.0. The source IP address is 0.0.0.0 since the client does not have a configured IP address.

If a DHCP server exists on this local subnet and is configured and operating correctly, the DHCP server will hear the broadcast and respond with a DHCPOFFER message. If a DHCP server does not exist on the local subnet, there must be a DHCP/BootP Relay Agent on this local subnet to forward the DHCPDISCOVER message to a subnet that contains a DHCP server.

This relay agent can either be a dedicated host (Microsoft Windows Server, for example) or a router (a Cisco router configured with interface level IP helper statements, for example).

…

After the client receives a DHCPOFFER, it responds with a DHCPREQUEST message, indicating its intent to accept the parameters in the DHCPOFFER, and moves into the requesting state. The client may receive multiple DHCPOFFER messages, one from each DHCP server that received the original DHCPDISCOVER message. The client chooses one DHCPOFFER and responds to that DHCP server only, implicitly declining all other DHCPOFFER messages. The client identifies the selected server by populating the Server Identifier option field with the DHCP server’s IP address.

The DHCPREQUEST is also a broadcast, so all DHCP servers that sent a DHCPOFFER will see the DHCPREQUEST, and each will know whether its DHCPOFFER was accepted or declined. Any additional configuration options that the client requires will be included in the options field of the DHCPREQUEST message. Even though the client has been offered an IP address, it will send the DHCPREQUEST message with a source IP address of 0.0.0.0. At this time, the client has not yet received verification that it is clear to use the IP address.

…

Client-server conversation for a client obtaining a DHCP address where the client and DHCP server reside on same subnet:

what-is-the-difference-between-127001-and-0000-01

Source: Understanding and Troubleshooting DHCP in Catalyst Switch or Enterprise Networks

Default Route

This document explains how to configure a default route or gateway of last resort. These IP commands are used:

ip default-gateway
ip default-network
ip route 0.0.0.0 0.0.0.0
IP Route 0.0.0.0 0.0.0.0

Creating a static route to the network 0.0.0.0 0.0.0.0 is another way to set the gateway of last resort on a router. As with the ip default-network command, using the static route to 0.0.0.0 is not dependent on any routing protocols. However, IP routing must be enabled on the router.

Note: IGRP does not understand a route to 0.0.0.0. Therefore, it cannot propagate default routes created using the ip route 0.0.0.0 0.0.0.0 command. Use the ip default-network command to have IGRP propagate a default route.

Source: Configuring a Gateway of Last Resort Using IP Commands

express static server for Angular2 App(dist)

https://gist.github.com/xgqfrms-GitHub/7175a873cd6eed5f6b6baa4b068d03d2

https://gist.github.com/xgqfrms-GitHub

https://gist.github.com/xgqfrms-GitHub/6e1554b5d73f4774dd338dd871611076

https://console.firebase.google.com/project/angular2-88ac6/hosting

https://ide.c9.io/xgqfrms/angular2

process.env.PORT || 4200, process.env.IP || "127.0.0.1"

npm packages

$ npm i -D express
$ npm i -D async
$ npm i -D socket.io

$ npm i -D express async socket.io

$ npm i -D express
$ npm i -D async
$ npm i -D socket.io

express-ng2-error