Workaround for WSL2 network broken on VPN

WSL2_VPN_Workaround_Instructions.md

Overview

Internet connection and DNS routing are broken from WSL2 instances, when some VPNs are active. The workaround breaks down into two problems:

1. Network connection to internet
2. DNS in WSL2

This problem is tracked in multiple microsoft/WSL issues including, but not limited to:

• microsoft/WSL#5068
• microsoft/WSL#4277
• microsoft/WSL#4246

Network connection

When the VPN connection is active, network traffic out of WSL2 is not passed to the internet.

Changing the Interface Metric 1 -> 6000 for AnyConnect VPN Adapter resolves the connection issue, but this has to be done after each time the VPN connects.

By default, the Interface Metrics for AnyConnect are:

• IPv6: 6000
• IPv4: 1

ping times out from WSL Shell.

Changing the Interface Metrics for AnyConnect to:

• IPv6: 6000
• IPv4: 6000

ping to IP Addresses succeed, but still no DNS Resolution.

DNS Resolution

When the VPN is active, the autogenerated /etc/resolv.conf does not work. The list of nameservers must be manually built to include some sane default DNS Name Servers and the DNS from the VPN.

First, disable automatically generating /etc/resolv.conf. Add the following configuration, or create the file if it doesn't exist. The path to this file is from the shell prompt of your WSL2 instance.

/etc/wsl.conf

[network]
generateResolvConf = false

Next, manually add the corportate DNS Server as the first nameserver in /etc/resolv.conf.

/etc/resolv.conf

nameserver <corporateDNS1>
nameserver <corporateDNS2>
nameserver 1.1.1.1

To get <corporateDNS> addresses, use ipconfig /all from CMD or Powershell prompt, and check the details of the VPN adapter:

Description . . . . . . . . . . . : Cisco AnyConnect Secure Mobility Client Virtual Miniport Adapter for Windows x64
Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-XX
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : xxxx:xxxx:xxxx:xxxx(Preferred)
Link-local IPv6 Address . . . . . : xxxx:xxxx:xxxx:xxxx(Preferred)
IPv4 Address. . . . . . . . . . . : 10.20.30.40(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : ::
                                    0.0.0.0
DHCPv6 IAID . . . . . . . . . . . :
DHCPv6 Client DUID. . . . . . . . : 
DNS Servers . . . . . . . . . . . : 123.45.67.89    <- Corporate DNS 1
                                    123.45.67.90    <- Corporate DNS 2
Primary WINS Server . . . . . . . : xxx.xx.xxx.xx
NetBIOS over Tcpip. . . . . . . . : Enabled

Automatically update Interface Metric

To automate this, I put the PS command in a script and created a Scheduled Task to run every time there is a network change.

Save the script in a file

First, create the script. I have a 'scripts' directory in my Windows user home, so I put it at:

%HOMEPATH%\scripts\UpdateAnyConnectInterfaceMetric.ps1

Get-NetAdapter | Where-Object {$_.InterfaceDescription -Match "Cisco AnyConnect"} | Set-NetIPInterface -InterfaceMetric 6000

You can save it where you want, just make sure to use that path in step 13 below.

Create the scheduled task:

1. Open 'Task Scheduler'
2. Click "Create Task" on Right Sidebar
3. Name: Update Anyconnect Adapter Interface Metric for WSL2
4. Set Security Options
   • Check box: 'Run with highest priveleges'
5. Select 'Triggers' Tab
6. Click 'New' at bottom of Window
7. Open 'Begin the task' drop-down
8. Select 'On an Event'
9. Configure Event:
   • option 1: Trigger on any Network Change
     • Log: 'Microsoft-Windows-NetworkProfile/Operational'
     • Source: 'NetworkProfile'
     • Event ID: '10000'
   • option 2: Trigger only when AnyConnect Client successfully connects to VPN
     • Log: 'Cisco AnyCOnnect Secure Mobility Client'
     • Source: 'acvpnagent'
     • Event ID: '2039'
10. Click 'OK'
11. Select 'Actions' Tab
12. Click 'New'
13. Configure Action:
    • Action: 'Start a Program'
    • Program/script: 'Powershell.exe'
    • Add arguments: '-ExecutionPolicy Bypass -File %HOMEPATH%\scripts\UpdateAnyConnectInterfaceMetric.ps1'
14. Click 'OK'
15. Select 'Conditions' Tab
16. Uncheck box:
    • Power -> Start the task only if the computer is on AC Power
17. Click 'OK'

When AnyConnect finishes connecting, a Powershell window pops up for a couple seconds and WSL can reach the network.

after you connect to the VPN but still can not reach into internet ( ping 8.8.8.8 did not work, data losses )
you need to re-connect to VPN to make sure the script is re-run in Task Scheduler.

NOTE:
Cisco secure client updates, the above method can not be execute automatically, run manually is the easy way

https://gist.github.com/pyther/b7c03579a5ea55fe431561b502ec1ba8?permalink_comment_id=3682593