Updated script that builds OpenSSL with Bitcode enabled (tested with Xcode 7.0b3)

openssl-build.h

#!/bin/bash

# This script downlaods and builds the iOS and Mac openSSL libraries with Bitcode enabled

# Credits:
# https://github.com/st3fan/ios-openssl
# https://github.com/x2on/OpenSSL-for-iPhone/blob/master/build-libssl.sh
# Peter Steinberger, PSPDFKit GmbH, @steipete.

set -e

usage ()
{
	echo "usage: $0 [minimum iOS SDK version (default 8.0)]"
	exit 127
}

if [ $1 -e "-h" ]; then
	usage
fi

if [ -z $1 ]; then
	SDK_VERSION="9.0"
	MIN_SDK_VERSION="8.0"
else
	SDK_VERSION=$1
fi

OPENSSL_VERSION="openssl-1.0.2d"
DEVELOPER=`xcode-select -print-path`

buildMac()
{
	ARCH=$1

	echo "Building ${OPENSSL_VERSION} for ${ARCH}"

	TARGET="darwin-i386-cc"

	if [[ $ARCH == "x86_64" ]]; then
		TARGET="darwin64-x86_64-cc"
	fi

	export CC="${BUILD_TOOLS}/usr/bin/clang -fembed-bitcode"

	pushd . > /dev/null
	cd "${OPENSSL_VERSION}"
	./Configure no-asm ${TARGET} --openssldir="/tmp/${OPENSSL_VERSION}-${ARCH}" &> "/tmp/${OPENSSL_VERSION}-${ARCH}.log"
	make >> "/tmp/${OPENSSL_VERSION}-${ARCH}.log" 2>&1
	make install >> "/tmp/${OPENSSL_VERSION}-${ARCH}.log" 2>&1
	make clean >> "/tmp/${OPENSSL_VERSION}-${ARCH}.log" 2>&1
	popd > /dev/null
}

buildIOS()
{
	ARCH=$1

	pushd . > /dev/null
	cd "${OPENSSL_VERSION}"
  
	if [[ "${ARCH}" == "i386" || "${ARCH}" == "x86_64" ]]; then
		PLATFORM="iPhoneSimulator"
	else
		PLATFORM="iPhoneOS"
		sed -ie "s!static volatile sig_atomic_t intr_signal;!static volatile intr_signal;!" "crypto/ui/ui_openssl.c"
	fi
  
	export $PLATFORM
	export CROSS_TOP="${DEVELOPER}/Platforms/${PLATFORM}.platform/Developer"
	export CROSS_SDK="${PLATFORM}${SDK_VERSION}.sdk"
	export BUILD_TOOLS="${DEVELOPER}"
	export CC="${BUILD_TOOLS}/usr/bin/gcc -fembed-bitcode -arch ${ARCH}"
   
	echo "Building ${OPENSSL_VERSION} for ${PLATFORM} ${SDK_VERSION} ${ARCH}"

	if [[ "${ARCH}" == "x86_64" ]]; then
		./Configure no-asm darwin64-x86_64-cc --openssldir="/tmp/${OPENSSL_VERSION}-iOS-${ARCH}" &> "/tmp/${OPENSSL_VERSION}-iOS-${ARCH}.log"
	else
		./Configure iphoneos-cross --openssldir="/tmp/${OPENSSL_VERSION}-iOS-${ARCH}" &> "/tmp/${OPENSSL_VERSION}-iOS-${ARCH}.log"
	fi
	# add -isysroot to CC=
	sed -ie "s!^CFLAG=!CFLAG=-isysroot ${CROSS_TOP}/SDKs/${CROSS_SDK} -miphoneos-version-min=${MIN_SDK_VERSION} !" "Makefile"

	make >> "/tmp/${OPENSSL_VERSION}-iOS-${ARCH}.log" 2>&1
	make install >> "/tmp/${OPENSSL_VERSION}-iOS-${ARCH}.log" 2>&1
	make clean >> "/tmp/${OPENSSL_VERSION}-iOS-${ARCH}.log" 2>&1
	popd > /dev/null
}

echo "Cleaning up"
rm -rf include/openssl/* lib/*

mkdir -p lib
mkdir -p include/openssl/

rm -rf "/tmp/${OPENSSL_VERSION}-*"
rm -rf "/tmp/${OPENSSL_VERSION}-*.log"

rm -rf "${OPENSSL_VERSION}"

if [ ! -e ${OPENSSL_VERSION}.tar.gz ]; then
	echo "Downloading ${OPENSSL_VERSION}.tar.gz"
	curl -O http://www.openssl.org/source/${OPENSSL_VERSION}.tar.gz
else
	echo "Using ${OPENSSL_VERSION}.tar.gz"
fi

echo "Unpacking openssl"
tar xfz "${OPENSSL_VERSION}.tar.gz"

buildMac "x86_64"

echo "Copying headers"
cp /tmp/${OPENSSL_VERSION}-x86_64/include/openssl/* include/openssl/

echo "Building Mac libraries"
lipo \
	"/tmp/${OPENSSL_VERSION}-x86_64/lib/libcrypto.a" \
	-create -output lib/libcrypto_Mac.a

lipo \
	"/tmp/${OPENSSL_VERSION}-x86_64/lib/libssl.a" \
	-create -output lib/libssl_Mac.a

buildIOS "armv7"
buildIOS "arm64"
buildIOS "x86_64"
buildIOS "i386"

echo "Building iOS libraries"
lipo \
	"/tmp/${OPENSSL_VERSION}-iOS-armv7/lib/libcrypto.a" \
	"/tmp/${OPENSSL_VERSION}-iOS-i386/lib/libcrypto.a" \
	-create -output lib/libcrypto_iOS.a

lipo \
	"/tmp/${OPENSSL_VERSION}-iOS-armv7/lib/libssl.a" \
	"/tmp/${OPENSSL_VERSION}-iOS-i386/lib/libssl.a" \
	-create -output lib/libssl_iOS.a

	echo "Adding 64-bit libraries"
	lipo \
		"lib/libcrypto_iOS.a" \
		"/tmp/${OPENSSL_VERSION}-iOS-arm64/lib/libcrypto.a" \
		"/tmp/${OPENSSL_VERSION}-iOS-x86_64/lib/libcrypto.a" \
		-create -output lib/libcrypto_iOS.a

	lipo \
		"lib/libssl_iOS.a" \
		"/tmp/${OPENSSL_VERSION}-iOS-arm64/lib/libssl.a" \
		"/tmp/${OPENSSL_VERSION}-iOS-x86_64/lib/libssl.a" \
		-create -output lib/libssl_iOS.a

echo "Cleaning up"
rm -rf /tmp/${OPENSSL_VERSION}-*
rm -rf ${OPENSSL_VERSION}

echo "Done"

@major1314 and @tomassliz , did you check the log under the /tmp/openssl-1.0.2d-xxxxx.log ? (xxxxx is the platform like i386, armv7)

I have the same problem and I found it because of the path.

I build in /Users/myusername/Google Drive/openssl . However, it didn't work and i cannot build with the spacing in folder path. After I changed the folder to /Users/myusername/openssl and it was working fine.

Updated version here: https://gist.github.com/felix-schwarz/c61c0f7d9ab60f53ebb0

For anyone using this, you can replace export CC=clang; with export CC=clang -fembed-bitcode; and ./Configure ios64-cross no-shared no-dso no-hw no-engine --prefix=/usr/local/openssl-ios64 with ./Configure ios64-cross no-shared no-dso no-hw no-engine no-asm --prefix=/usr/local/openssl-ios64. If you've already run a failing build make sure to make clean before trying again.

try to give answer to my STO question.

https://stackoverflow.com/q/46808851/6285383

anyone tried enabling bitcode for Android while building openssl? I'm guessing this same script would work... does anyone know?