zy-m100-s.ts

const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const extend = require('zigbee-herdsman-converters/lib/extend');
const ota = require('zigbee-herdsman-converters/lib/ota');
const tuya = require('zigbee-herdsman-converters/lib/tuya');
const utils = require('zigbee-herdsman-converters/lib/utils');
const globalStore = require('zigbee-herdsman-converters/lib/store');
const e = exposes.presets;
const ea = exposes.access;

const definition = {
    fingerprint: tuya.fingerprint('TS0601', ['_TZE204_qasjif9e']),
    model: 'ZY-M100-S',
    vendor: 'TuYa',
    description: 'Mini Human Breathe Sensor',
    fromZigbee: [tuya.fz.datapoints],
    toZigbee: [tuya.tz.datapoints],
    exposes: [
        e.illuminance_lux(), e.presence(),
        e.numeric('target_distance', ea.STATE).withDescription('Distance to target').withUnit('m'),
        e.numeric('radar_sensitivity', ea.STATE_SET).withValueMin(0).withValueMax(9).withValueStep(1)
            .withDescription('sensitivity of the radar'),
        e.numeric('minimum_range', ea.STATE_SET).withValueMin(0).withValueMax(9.5).withValueStep(0.15)
            .withDescription('Minimum range').withUnit('m'),
        e.numeric('maximum_range', ea.STATE_SET).withValueMin(0).withValueMax(9.5).withValueStep(0.15)
            .withDescription('Maximum range').withUnit('m'),
        e.numeric('detection_delay', ea.STATE_SET).withValueMin(0).withValueMax(10).withValueStep(0.1)
            .withDescription('Detection delay').withUnit('s'),
        e.numeric('fading_time', ea.STATE_SET).withValueMin(0.5).withValueMax(1500).withValueStep(1)
            .withDescription('Fading time').withUnit('s'),
    ],
    meta: {
        tuyaDatapoints: [
            [1, 'presence', tuya.valueConverter.trueFalse1],
            [9, 'target_distance', tuya.valueConverter.divideBy100],
            [104, 'illuminance_lux', tuya.valueConverter.raw],
            [2, 'radar_sensitivity', tuya.valueConverter.raw],
            [4, 'maximum_range', tuya.valueConverter.divideBy100],
            [3, 'minimum_range', tuya.valueConverter.divideBy100],
            [102, 'fading_time', tuya.valueConverter.divideBy10],
            [101, 'detection_delay', tuya.valueConverter.divideBy10],
        ],
    },
};

module.exports = definition;

NOTE: This device is now in the dev branch so you probably don't need this converter unless you want to stay on the stable branch.

You can switch to the dev branch by following these instructions.