Forked from libcrack/nct6776-isa-0290-sensord.conf
Created
December 16, 2017 11:53
-
-
Save ronhks/f31c5064895719ed4001229ee7c96a72 to your computer and use it in GitHub Desktop.
Sensord config file for nct6776-isa-0290
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
chip "nct6776-isa-0290" | |
# =========================== | |
# Default /etc/sensors3.conf | |
# =========================== | |
label in0 "Vcore" | |
label in2 "AVCC" | |
label in3 "+3.3V" | |
label in7 "3VSB" | |
label in8 "Vbat" | |
set in2_min 3.3 * 0.90 | |
set in2_max 3.3 * 1.10 | |
set in3_min 3.3 * 0.90 | |
set in3_max 3.3 * 1.10 | |
set in7_min 3.3 * 0.90 | |
set in7_max 3.3 * 1.10 | |
set in8_min 3.0 * 0.90 | |
set in8_max 3.3 * 1.10 | |
# ======================================================= | |
# Libcrack /etc/sensors.d/nct6776-isa-0290 | |
# ======================================================= | |
### Libcrack SYSTIN | |
set temp1_max 75 | |
set temp1_max_hyst 70 | |
### Libcrack CPUTIN | |
set temp2_max 80 | |
set temp2_max_hyst 75 | |
# in1_input | |
# in1: +0.20 V (min = +1.60 V, max = +2.00 V) [ALARM] | |
set in1_min 0.000 | |
set in1_max 2.000 | |
# in4_input 0.784 | |
set in4_min 0.500 | |
set in4_max 1.800 | |
# in5_input 1.688 | |
set in5_min 1.448 | |
set in5_max 1.800 | |
# Sensor alarm: Chip nct6776-isa-0290: in6: +1.86 V (min = +1.45 V, max = +1.80 V) [ALARM] | |
# in6_input 1.864 | |
set in6_min 1.450 | |
set in6_max 1.900 | |
set fan1_min 000.000 | |
set fan2_min 500.000 | |
ignore fan1 | |
ignore fan3 | |
ignore fan4 | |
ignore intrusion0 | |
ignore intrusion1 | |
# # root@watergate:/etc/sensors.d # sensors -u | |
# nct6776-isa-0290 | |
# Adapter: ISA adapter | |
# Vcore: | |
# in0_input: 0.896 | |
# in0_min: 0.000 | |
# in0_max: 1.744 | |
# in0_alarm: 0.000 | |
# in0_beep: 0.000 | |
# in1: | |
# in1_input: 0.200 | |
# in1_min: 1.600 | |
# in1_max: 2.000 | |
# in1_alarm: 1.000 | |
# in1_beep: 0.000 | |
# AVCC: | |
# in2_input: 3.424 | |
# in2_min: 2.976 | |
# in2_max: 3.632 | |
# in2_alarm: 0.000 | |
# in2_beep: 0.000 | |
# +3.3V: | |
# in3_input: 3.408 | |
# in3_min: 2.976 | |
# in3_max: 3.632 | |
# in3_alarm: 0.000 | |
# in3_beep: 0.000 | |
# in4: | |
# in4_input: 0.784 | |
# in4_min: 1.448 | |
# in4_max: 1.800 | |
# in4_alarm: 1.000 | |
# in4_beep: 0.000 | |
# in5: | |
# in5_input: 1.688 | |
# in5_min: 1.448 | |
# in5_max: 1.800 | |
# in5_alarm: 0.000 | |
# in5_beep: 0.000 | |
# in6: | |
# in6_input: 1.864 | |
# in6_min: 0.000 | |
# in6_max: 0.000 | |
# in6_alarm: 1.000 | |
# in6_beep: 0.000 | |
# 3VSB: | |
# in7_input: 3.408 | |
# in7_min: 2.976 | |
# in7_max: 3.632 | |
# in7_alarm: 0.000 | |
# in7_beep: 0.000 | |
# Vbat: | |
# in8_input: 3.344 | |
# in8_min: 2.704 | |
# in8_max: 3.632 | |
# in8_alarm: 0.000 | |
# in8_beep: 0.000 | |
# fan1: | |
# fan1_input: 0.000 | |
# fan1_min: 2000.000 | |
# fan1_alarm: 1.000 | |
# fan1_beep: 0.000 | |
# fan1_pulses: 2.000 | |
# fan2: | |
# fan2_input: 964.000 | |
# fan2_min: 2000.000 | |
# fan2_alarm: 1.000 | |
# fan2_beep: 0.000 | |
# fan2_pulses: 2.000 | |
# fan4: | |
# fan4_input: 0.000 | |
# fan4_min: 2000.000 | |
# fan4_alarm: 1.000 | |
# fan4_beep: 0.000 | |
# fan4_pulses: 4.000 | |
# SYSTIN: | |
# temp1_input: 65.000 | |
# temp1_max: 50.000 | |
# temp1_max_hyst: 50.000 | |
# temp1_alarm: 1.000 | |
# temp1_type: 4.000 | |
# temp1_offset: 0.000 | |
# temp1_beep: 0.000 | |
# CPUTIN: | |
# temp2_input: 56.000 | |
# temp2_max: 80.000 | |
# temp2_max_hyst: 75.000 | |
# temp2_alarm: 0.000 | |
# temp2_type: 4.000 | |
# temp2_offset: 0.000 | |
# temp2_beep: 0.000 | |
# AUXTIN: | |
# temp3_input: -30.000 | |
# temp3_max: 80.000 | |
# temp3_max_hyst: 75.000 | |
# temp3_alarm: 0.000 | |
# temp3_type: 4.000 | |
# temp3_offset: 0.000 | |
# temp3_beep: 0.000 | |
# PCH_CHIP_TEMP: | |
# temp7_input: 0.000 | |
# PCH_CPU_TEMP: | |
# temp8_input: 0.000 | |
# PCH_MCH_TEMP: | |
# temp9_input: 0.000 | |
# beep_enable: | |
# beep_enable: 0.000 | |
# | |
# k10temp-pci-00c3 | |
# Adapter: PCI adapter | |
# temp1: | |
# temp1_input: 38.375 | |
# temp1_max: 70.000 | |
# temp1_crit: 70.000 | |
# temp1_crit_hyst: 69.000 | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment