rafous rafous

## btt canbus setup.md

      
              1 file
            
          
              10 forks
            
          
              19 comments
            
          
              21 stars
            
          
                fredrikasberg
                / btt canbus setup.md
            
            
              Last active
              November 21, 2024 12:09
            
              
                BTT Manta M8P v1.1 + BTT EBB 2209 Canbus setup
              
          
    BTT Manta M8P v1.1 + BTT EBB 2209 Canbus setup

Since documentation has been somewhat lacking... here is a quick write-up to get started!
Sources:

https://github.com/Esoterical/voron_canbus/tree/main/toolhead_flashing/common_hardware/BigTreeTech%20SB2209%20and%20SB2240
https://github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/sample-bigtreetech-ebb-sb-canbus-v1.0.cfg

Boards:

  
## filament_dryer.cfg
; An idea for using the heated bed of a 3D printer as a filament dryer.
; Adds GCODE command: START_DRYER TIME=T TEMPERATURE=C
; (T is time in seconds, C is bed temperature in Celsuis)
; To stop drying early, use STOP_DRYER.
; Also defined some utility macros: DRY_PLA, DRY_PETG and DRY_ABS.
; Edit these with your own preferred defaults.

[gcode_macro START_DRYER]
description: Start the heated bed filament dryer.
gcode:
	; An idea for using the heated bed of a 3D printer as a filament dryer.
	; Adds GCODE command: START_DRYER TIME=T TEMPERATURE=C
	; (T is time in seconds, C is bed temperature in Celsuis)
	; To stop drying early, use STOP_DRYER.
	; Also defined some utility macros: DRY_PLA, DRY_PETG and DRY_ABS.
	; Edit these with your own preferred defaults.

	[gcode_macro START_DRYER]
	description: Start the heated bed filament dryer.
	gcode: