mschnetzer

library(tidyverse)
library(sf)
library(gganimate)
library(transformr)
library(lubridate)
library(msthemes) # https://github.com/mschnetzer/msthemes

# Import online map
bezirke <- st_read("https://raw.githubusercontent.com/ginseng666/GeoJSON-TopoJSON-Austria/master/2017/simplified-99.9/bezirke_999_geo.json") %>%
  mutate(iso = as.numeric(iso))

ceres-c

#!/usr/bin/python3

# Author: ceres-c 2019-12-29

# Authenticate to ICODE SLI tags

import hid

# Global defines & commands
password = [0x00, 0x00, 0x00, 0x00] # You have to find it yourself, try to search online in german ;-)

NoraCodes

/**
 * ESP8266 Scanner - Scans for networks on the 2.4GHz band and prints them out to the console.
 * Program it onto your ESP8266, pull up miniterm, the Serial Monitor, etc, and view a list of
 *  wireless networks on your computer.
 * Requres Arduino JSON (http://arduinojson.org/), downloadable from Library Manager or GitHub.
 * Or, set OUTPUT_JSON and consume the serial output with your favorite JSON parser.
 * 
 * Created by Leonora Tindall in 2017 for the ESP8266.
 * This software is licensed under the GNU General Public License, Version 3.0.
 */

mrbar42

running:

bash create-vod-hls.sh beach.mkv

will produce:

    beach/
      |- playlist.m3u8
 |- 360p.m3u8

PaulKinlan

function waitForElement(selector) {
  return new Promise(function(resolve, reject) {
    var element = document.querySelector(selector);

    if(element) {
      resolve(element);
      return;
    }

    var observer = new MutationObserver(function(mutations) {

sndrs

# This will run `nvm use` everytime you change directory, if
#   1. an .nvmrc file is present
#   2. there is no .nvmrc but you're not using your default node
# Add it to your `.bash_profile` (or wherever else is suitable for your setup).

enter_directory(){
  if [ "$PWD" != "$PREV_PWD" ]; then
    PREV_PWD="$PWD";
    if [ -e ".nvmrc" ]; then
      nvm use;

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

kriskowal

data
    for every worker
        owned chunks, those chunks that must be computed for each generation
        neighbors, chunks that must be received to proceed to next generation
        needed chunks = owned chunks + neighbors
    for this generation on every worker
        transmitted chunks
    for the prior, current, and next generation on this worker
        needed chunks, a snapshot of owned chunks and neighbor chunks for this worker, less any completed chunks
        needed owned chunks, a snapshot of owned chunks for this worker, less any completed chunks

Droogans

var _ = require('lodash'); // gotta use lodash for everything
var bill = require('buffalo');
var events = bill.events;
var conditions;
var victim;

/**
 * TODO -- stop mixing promises and events, this API is really messed up.
 */
describe('suit construction', function () {

revolunet

Python VS ES6 syntax comparison

Python syntax here : 2.7 - online REPL

Javascript ES6 via Babel transpilation - online REPL

Imports

import math