UVC ConfigFS Gadget configuration tool

uvc-gadget.sh

#!/bin/sh

set -e
#set -x

CONFIGFS="/sys/kernel/config"
GADGET="$CONFIGFS/usb_gadget"
VID="0x0525"
PID="0xa4a2"
SERIAL="0123456789"
MANUF=$(hostname)
PRODUCT="UVC Gadget"

USBFILE=/root/usbstorage.img

BOARD=$(strings /proc/device-tree/model)

case $BOARD in
	"Renesas Salvator-X board based on r8a7795 ES1.x")
		UDC_USB2=e6590000.usb
		UDC_USB3=ee020000.usb

		UDC_ROLE2=/sys/devices/platform/soc/ee080200.usb-phy/role
		UDC_ROLE2=/dev/null #Not needed - always peripheral
		UDC_ROLE3=/sys/devices/platform/soc/ee020000.usb/role

		UDC=$UDC_USB2
		UDC_ROLE=$UDC_ROLE2
		;;

	"TI OMAP4 PandaBoard-ES")
		UDC=`ls /sys/class/udc` # Should be musb-hdrc.0.auto
		UDC_ROLE=/dev/null # Not needed - peripheral enabled
		;;

	*)
		UDC=`ls /sys/class/udc` # will identify the 'first' UDC
		UDC_ROLE=/dev/null # Not generic
		;;
esac

echo "Detecting platform:"
echo "  board : $BOARD"
echo "  udc   : $UDC"     

create_msd() {
	# Example usage:
	#	create_msd <target config> <function name> <image file>
       	#	create_msd configs/c.1 mass_storage.0 /root/backing.img
	CONFIG=$1
	FUNCTION=$2
	BACKING_STORE=$3

	if [ ! -f $BACKING_STORE ]
	then
        	echo "\tCreating backing file"
        	dd if=/dev/zero of=$BACKING_STORE bs=1M count=32 > /dev/null 2>&1
	        mkfs.ext4 $USBFILE > /dev/null 2>&1
        	echo "\tOK"
	fi

        echo "\tCreating MSD gadget functionality"
        mkdir functions/$FUNCTION
        echo 1 > functions/$FUNCTION/stall
        echo $BACKING_STORE > functions/$FUNCTION/lun.0/file
        echo 1 > functions/$FUNCTION/lun.0/removable
        echo 0 > functions/$FUNCTION/lun.0/cdrom

        ln -s functions/$FUNCTION configs/c.1

        echo "\tOK"
}

delete_msd() {
	# Example usage:
	#	delete_msd <target config> <function name>
       	#	delete_msd config/c.1 uvc.0
	CONFIG=$1
	FUNCTION=$2

        echo "Removing Mass Storage interface : $FUNCTION"
        rm -f $CONFIG/$FUNCTION
        rmdir functions/$FUNCTION
        echo "OK"
}

create_uvc() {
	# Example usage:
	#	create_uvc <target config> <function name>
       	#	create_uvc config/c.1 uvc.0
	CONFIG=$1
	FUNCTION=$2

        echo "	Creating UVC gadget functionality : $FUNCTION"
        mkdir functions/$FUNCTION
	mkdir -p functions/$FUNCTION/streaming/uncompressed/u/360p
	cat <<EOF > functions/$FUNCTION/streaming/uncompressed/u/360p/dwFrameInterval
666666
1000000
5000000
EOF
	mkdir functions/$FUNCTION/streaming/header/h
	cd functions/$FUNCTION/streaming/header/h
	ln -s ../../uncompressed/u
	cd ../../class/fs
	ln -s ../../header/h
	cd ../../class/hs
	ln -s ../../header/h
	cd ../../../control
	mkdir header/h
	ln -s header/h class/fs
	ln -s header/h class/ss
	cd ../../../
	echo 2048 > functions/$FUNCTION/streaming_maxpacket

	ln -s functions/$FUNCTION configs/c.1
}

delete_uvc() {
	# Example usage:
	#	delete_uvc <target config> <function name>
       	#	delete_uvc config/c.1 uvc.0
	CONFIG=$1
	FUNCTION=$2

        echo "	Deleting UVC gadget functionality : $FUNCTION"
	rm $CONFIG/$FUNCTION

	rm functions/$FUNCTION/control/class/*/h
	rm functions/$FUNCTION/streaming/class/*/h
	rm functions/$FUNCTION/streaming/header/h/u
	rmdir functions/$FUNCTION/streaming/uncompressed/u/360p
	rmdir functions/$FUNCTION/streaming/uncompressed/u
	rmdir functions/$FUNCTION/streaming/header/h
	rmdir functions/$FUNCTION/control/header/h
	rmdir functions/$FUNCTION
}

case "$1" in
    start)
        echo "Creating the USB gadget"
        #echo "Loading composite module"
        #modprobe libcomposite

        echo "Creating gadget directory g1"
        mkdir -p $GADGET/g1

        cd $GADGET/g1
        if [ $? -ne 0 ]; then
            echo "Error creating usb gadget in configfs"
            exit 1;
        else
            echo "OK"
        fi

	echo "Setting Vendor and Product ID's"
        echo $VID > idVendor
        echo $PID > idProduct
        echo "OK"

        echo "Setting English strings"
        mkdir -p strings/0x409
        echo $SERIAL > strings/0x409/serialnumber
        echo $MANUF > strings/0x409/manufacturer
        echo $PRODUCT > strings/0x409/product
        echo "OK"

	echo "Creating Config"
        mkdir configs/c.1
        mkdir configs/c.1/strings/0x409

        echo "Creating functions..."
	#create_msd configs/c.1 mass_storage.0 $USBFILE
	create_uvc configs/c.1 uvc.0
        echo "OK"


        echo "Binding USB Device Controller"
	echo $UDC > UDC
	echo peripheral > $UDC_ROLE
	cat $UDC_ROLE
        echo "OK"
        ;;

    stop)
        echo "Stopping the USB gadget"

	set +e # Ignore all errors here on a best effort

        cd $GADGET/g1

        if [ $? -ne 0 ]; then
            echo "Error: no configfs gadget found" 
            exit 1;
        fi

        echo "Unbinding USB Device Controller"
        grep $UDC UDC && echo "" > UDC
        echo "OK"

	delete_uvc configs/c.1 uvc.0
	#delete_msd configs/c.1 mass_storage.0

	echo "Clearing English strings"
        rmdir strings/0x409
        echo "OK"

        echo "Cleaning up configuration"
        rmdir configs/c.1/strings/0x409
        rmdir configs/c.1
        echo "OK"

        echo "Removing gadget directory"
        cd $GADGET
        rmdir g1
        cd /
        echo "OK"

        #echo "Disable composite USB gadgets"
        #modprobe -r libcomposite
        #echo "OK"
        ;;
    *)
        echo "Usage : $0 {start|stop}"
esac

@kbingham Thanks for Quick reply , You are right and i even thought something of pipelining but was not confident in implementing though but before that Can the PC even recognize the solo Raspberry(no CSI camera attached) as a camera device after doing the above mentioned configurations in this documentaion shared by you.Because for me it,s not happenning.My primary objective is to first let the Raspi be recognized as a Camera device whether camera is attached to it or not .

Are you running the uvc-gadget application? There has to be something sending frames or otherwise the host will not be happy. Our implementation of uvc-gadget at https://gitlab.freedesktop.org/camera/uvc-gadget/ can send images from files or from a test pattern generator if you don't have a camera attached, or you can use a virtual camera device like vivid ...

To be clear - this script in this gist is only about configuration. The system must run an application which will manage the interactions with the host, respond to messages and events, and deliver frames.

Hi @kbingham , i have tried above shared repo as well your repository but i think the options like mentioned in the repository by 'wlhe' (which somehow is working for me) for standalone operation of 'Pi' i.e, without any capture device attached to it , are not present there in your and the above shared freedesktop library .Please correct me if i am wrong as i just typed uvc-gadget -h and couldn,t find the standalone option in them .
.So,this is all about your repository and I might be doing some silly mistake i guess if you can please helping pointing it out .

Now, i see that all of these repo are linked some or other way on ideasonboard which i figured out after getting same readme file in multiple repos :) .Thanks to all of you guys for such outstanding work !. Thinking that you are aware of 'wlhe' repo ...could you please help me figuring out error as it,s working is very crucial step in my main project .

I ran the command ./uvc-gadget -d -i /home/pi/Downloads/test.mjpeg -u /dev/video0 -v uvc.0 with the 'wlhe' repo and with the scrpit mentioned in this documentation but i get 'ioctl' error even though i am passing mjpeg format only .
Snap of error :

My issue is similar to this raised in your repo only because for me also ioctl: VIDIOC_ENUM_FMT , Type: Video Capture . Can you please share if there is an updated repo which has resolved this issue or any similar kind of issue.
Also i am using VLC and selecting capture device as this newly made UVC camera in the host side.Please correct me if i am wrong .

Thanks for your time and effort ! Really appreciate that.

EDIT :My bad , missed ' -d ' in command for standalone mode .Updated .

This is not a support forum. Please use https://gitlab.freedesktop.org/camera/uvc-gadget/

Hey i hope you doing well,
I have stuck in one problem which you can see on image

When I run this script, it shows a "resource busy" error, and I already have the /config/usb_gadget/g1/configs/b.1 directory, so it does not create a new c.1 directory. Can you help me solve this problem?

This is not a support forum. Please use https://gitlab.freedesktop.org/camera/uvc-gadget/