| Creating a Flipper Zero app to test for this attack involves writing a script that can interact with the RFID module on the Flipper Zero to perform the necessary steps. The Flipper Zero uses a scripting language called **.fap** (Flipper App) format, typically written in C or a high-level scripting language, but it also supports custom Python-like scripting with `flipperzero-tui`. | |
| Here's a basic outline for creating an app that can check for the presence of the backdoor key on a MIFARE Classic card. Note that this is a simplified version and assumes some familiarity with Flipper Zero's development environment. | |
| ### **Step 1: Set Up the Development Environment** | |
| 1. **Install Flipper Zero SDK:** | |
| - Follow the official [Flipper Zero documentation](https://github.com/flipperdevices/flipperzero-firmware) to set up the SDK and development environment. | |
| 2. **Clone the Flipper Zero Firmware:** |
| #!/bin/bash | |
| gdb -p "$1" -batch -ex 'set {short}$rip = 0x050f' -ex 'set $rax=231' -ex 'set $rdi=0' -ex 'cont' |
| diff --git Makefile Makefile | |
| index 399c7db3a..345c9d9fd 100644 | |
| --- Makefile | |
| +++ Makefile | |
| @@ -198,25 +198,25 @@ benchmark: ## run benchmarks tests | |
| FORCE: | |
| define BUILD_BINARY = | |
| -@echo "$(WHALE) $@" | |
| -@go build ${DEBUG_GO_GCFLAGS} ${GO_GCFLAGS} ${GO_BUILD_FLAGS} -o $@ ${GO_LDFLAGS} ${GO_TAGS} ./$< |
Below are table of various projects that can completely exhaust n-bits of keyspace. In other words, counting completely and fully from 0 to 2ⁿ-1.
This Gist implies no discussion about how this is relevant to quantum computing using Grover's algorithm, meet-in-the-middle or birthday attacks, or anything of the like. It's strictly a Gist about raw speed, measuring the result in bits.
If you know of other noteworthy and verifiable brute force searching projects,
| export type MapTree<K extends readonly [unknown, ...unknown[]], V> = { | |
| 0: Map<K[number], V>, | |
| 1: ((..._: K) => any) extends ((_: infer Head, ...__: infer Tail) => any) | |
| ? Tail extends readonly [unknown, ...unknown[]] | |
| ? Map<Head, MapTree<Tail, V>> | |
| : never | |
| : never | |
| }[K extends readonly [unknown] ? 0 : 1] & { | |
| setKey(key: Readonly<K>, value: V): void; | |
| getKey(key: Readonly<K>): V | undefined; |
| https://www.reddit.com/r/synology/comments/a2erre/guide_intermediate_how_to_install_wireguard_vpn/ | |
| [Guide] [Intermediate] How to install Wireguard VPN | |
| After lots of trial and error I figured out how to compile Wireguard for my DS718+. The first thing I did was search in this sub for a guide but didn't find any. | |
| WARNING | |
| Wireguard is still experimental software. You should stay up-to-date with the daily snapshots. | |
| This guide also requires familiarity with the command line and how to build software from source. |
| $ ./try_local_metadata.sh | |
| Trying 169.254.169.254... found metadata | |
| Trying 169.254.43518... found metadata | |
| Trying 169.16689662... found metadata | |
| Trying 2852039166... found metadata | |
| Trying 0251.0376.0251.0376... found metadata | |
| Trying 0251.0376.0124776... found metadata | |
| Trying 251.0775248... - | |
| Trying 25177524776... - | |
| Trying 0xa9.0xfe.0xa9.0xfe... found metadata |
#Wireless Penetration Testing Cheat Sheet
##WIRELESS ANTENNA
root@uceka:~# ifconfig wlan0mon down
root@uceka:~# iwconfig wlan0mon mode monitor
root@uceka:~# ifconfig wlan0mon up
| ### | |
| ### | |
| ### UPDATE: For Win 11, I recommend using this tool in place of this script: | |
| ### https://christitus.com/windows-tool/ | |
| ### https://github.com/ChrisTitusTech/winutil | |
| ### https://www.youtube.com/watch?v=6UQZ5oQg8XA | |
| ### iwr -useb https://christitus.com/win | iex | |
| ### | |
| ### |
(by @andrestaltz)
If you prefer to watch video tutorials with live-coding, then check out this series I recorded with the same contents as in this article: Egghead.io - Introduction to Reactive Programming.