Arch Linux Arm on Lenovo Yoga Slim 7x (X elite)

arch-yoga.md

Arch

This is the method I used to install Arch on the yoga slim 7x. This is from memory so I may have forgotten things

prerequisites

• disable bitlocker in windows
• resize the windows partition
• disable secure boot in BIOS

installation

• Download the Debian 12 image from https://git.codelinaro.org/linaro/qcomlt/demos/debian-12-installer-image
• write it to USB, use gparted to resize the partition
• download the latest (ancient) arch linux arm generic image from https://archlinuxarm.org/platforms/armv8/generic
• unpack the initrd and add this tarball
• also add some tools like mkfs.ext4 and fdisk (I downloaded debian 12 versions and unpacked the necessary libs and binaries)
• boot from the USB (use F12)
• once in installer, press Fn+alt+F2 to get to another TTY
• create a wpa_supplicant file and start wpa_supplicant
• back on tty1, continue the installer until it has setup networking
• return to tty2
• create /boot and / partitions (and any other you want)
• mount / on /mnt
• unpack the tarball into /mnt
• mount /boot on /mnt/boot
• bind mount /sys, /dev, /proc and /run in /mnt
• chroot in /mnt
• set the date with the date command (otherwise signature verification fails)
• use

pacman-key --init
pacman-key --populate archlinuxarm

• update with pacman -Syyu
• copy kernel, initrd and device tree from the USB
• do the rest of Arch setup
• do some of the steps outlined by linaro, in particular the zink environment
• exit the chroot
• edit the USB grub to load from the nvme
• reboot with F12 and boot from the nvme
• build newer kernel, initrd and dtb
• get firmware from https://github.com/Seraphin-/linux-firmware-x1e80100-lenovo-yoga-slim7x

post installation

• I replaced the windows nvme with a bigger one that has only linux, that way I was able to update the UEFI boot manager to load Arch without the USB stick
  • Download shellaa64.efi and place it on USB stick
  • use the following grub entry:

  menuentry "UEFI Shell" {
    insmod fat
    insmod chain
    search --no-floppy --set=root --file /shellaa64.efi
    chainloader /shellaa64.efi
  }
  

  • boot to UEFI shell
  • use the commands in the debian 12 image explanation to set Arch as first boot entry
• install mesa from this PKGBUILD https://github.com/joske/PKGBUILDs-x1e/tree/master/mesa

I followed this method and stuck on kernel building

Looks like current 6.11-rc kernels already contains snapdragon device tree and drivers, but

• Codelinaro image might be a bit outdated, i cant proceed debian installation further than "downloading additional components", cause of glibc version mismatch in anna binary

• I created partitions on nvme,
  Copied arch tarball files into it;
  Chrooted in this unpacked arch-env;
  Built 6.11-rc7 kernel from kernel.org in this chroot;
  Installed it into chroot, generated a new initramfs;

  Now i can 'boot' kernel, using grub on usb stick (specify new initramfs, kernel and devicetree in grub console), but kernel boot logs just stops and switches to black screen. Looks like graphics fault, cause i can enter login creds and 'reboot' command, and laptop really trying to poweroff

So, what can i do wrong? Did anyone tried to build latest kernel from kernel.org for this laptop? How to build newer kernel for it, or just debug kernel loading at least?

It's probably due to the initrd. I have a 'working' base initrd (I think based on the debian one) and another based on the arch one that does not work for some reason. I was not yet able to figure out why

@weoses

Do you have the graphic firmware files in the initrd?

yes

try with this initrd (replace the kernel modules and repack)

https://drive.google.com/file/d/1TzLcW2DT19YDOfXs4VHpCHk1CIuBpjPu/view?usp=sharing

@weoses you probably want to use this branch: https://github.com/jhovold/linux/tree/wip/x1e80100-6.11-rc7

Linus' tree still misses bits

Do you have the graphic firmware files in the initrd?

I have a lot of firmware in initrd (i even disabled autodetect in mkinitcpio), and i really not sure which of it is for gpu part for this soc....

try with this initrd (replace the kernel modules and repack)

I tried boot from it as is (i thought we build kernels from same sources, but got strange error, and stuck in initramfs without keyboard)
And I merged firmware from it to my laptop, not helps

@weoses you probably want to use this branch: https://github.com/jhovold/linux/tree/wip/x1e80100-6.11-rc7

After building jhovold`s kernel and disabling kms i got boot with systemd logs few seconds after initramfs and with working keyboard (i am not sure that exactly this helps), looks like it is really graphics driver fault
Likely i really missed firmware somewhere

So i rebuilt kernel from https://github.com/jhovold/linux/tree/wip/x1e80100-6.11-rc7 using defconfig from author ( commit jhovold/linux@b9c3748),
added some kernel cmdline parameters as described in https://github.com/jhovold/linux/wiki/X13s
added firmwares from @joske initrd image
and gpu still fails

I will try to setup ssh server on laptop and at least check logs

The latest kernel gives working keyboard, touchscreen and trackpad.

Now working- bluetooth, sound, microphone, camera and battery monitoring. Also now real suspend and hiberante.

@smedir how did you get sound working? Do you mean using USB headphones or bluetooth?

For battery monitoring you need a pd-mapper, either in userspace or in kernel. For the userspace one, you need to find the jsn files from windows in firmware folder. The in-kernel one has issues.

Whoops!, that was a typo- It is Not working, sound, microphone and bluetooth. I wanted to see if anybody else got it working and how 😄 suspend and hibernate also not working.

Thanks for the tip into pd_mapper. I will look into it. I am using gnome, which gives a red battery with no levels, uses upowerd. I see messages in the log from upower - it is getting NaN readings.

Here's the image I used for installation: x1e-endeavouros.img.7z
I've built Calamares while booted from USB from this PKGBUILD with only slight modifications and a dirty hack described here. After pacman -U I overwrote the configs in /etc/calamares/ with configs from calamares_config.tar.gz (same GDrive folder as the image) and installed with systemd-boot.
The partitioning is the following:

1. ESP (stock from Windows) -> /efi
2. Other Windows partitions
3. Separate /boot (XBOOTLDR)
4. Separate /root (needs to have endeavouros label and be f2fs)
5. Separate /home

AFAIR it was necessary to create /home/liveuser for Calamares to work,
These configs still need some work (probably eos_bootloader module needs to be dropped), so after installation succeeds, it won't boot.
So one would need to chroot into the installed system, manually install linux-x1e and x1e-uki packages (second is optional; both packages are available in my repo) and create a simple systemd-boot config in /boot/loader/entries/ and then it should boot.
If installing x1e-uki, make sure to first create /etc/kernel/cmdline file:

efi=novamap pd_ignore_unused clk_ignore_unused fw_devlink=off cma=128M root=PARTLABEL=endeavouros rootfstype=f2fs rootwait rw loglevel=7

Does KVM virtualization work on those machines?

@kmeaw: It's... not impossible, but I don't know if anyone has tried it on the slim7x yet. The main difficulty is that by default these machines boot into EL1, and you have to jump through some hoops to boot them in EL2. See here: https://github.com/TravMurav/slbounce

Hardware support in EL2 is currently worse, because the default hypervisor provides some services that are missing when booting into EL2 using slbounce.

Also I don't know how much of KVM support is upstream yet, but I have heard that (with some unmerged patches) both normal and nested virt are working. (The person developing this is doing so on the DevKit AFAIK.)

@kmeaw just to give an update, in the last 5 days I made a lot of progress. I can now boot my machine in EL2, and run QEMU VMs without issues. Steps that are needed (also see this draft PR for my NixOS repo):

• Apply the device tree overlay from the slbounce repo: https://github.com/TravMurav/slbounce/blob/97b24ec89faa11827e7def220b0aa53dd5d5f447/dtbo/x1e-el2.dtso
• Add the id_aa64mmfr0.ecv=1 kernel param (without this QEMU will crash the whole system)
• Get tcblaunch.exe from C:\Windows\System32\tcblaunch.exe, and copy it to the root of your ESP
• Follow the instructions in the slbounce README for testing and loading it.

The things that don't work compared to EL1 are the battery indicator and DP altmode.

(There is also a patch that makes slbounce detect whether you are loading an overlayed device tree (see my PR for that), and only do SL if that's the case. This way you can select between EL1 and EL2 mode from the boot menu without having to go through an EFI shell.)

@kuruczgy Thank you for the update! I think this information would be really useful for someone considering buying a Snapdragon laptop and running Linux on it.