Using my Canon 70D DSLR camera as a web cam on Linux

dslr-webcam.md

You'll need:

1. Video 4 Linux loopback device kernel module (v4l2loopback) - Source: https://github.com/umlaeute/v4l2loopback (You might find builds in your distro's repos - I'm using Fedora so had to build it myself using https://github.com/danielkza/v4l2loopback-fedora/)
2. gPhoto2 - this is what allows you to access your cameras live feed over USB - this was available in Fedora's repos.
3. GStreamer or ffmpeg - this is what lets you stream the output from gPhoto2 into the loopback device.

It's been a little while since I set it all up so I can't remember all of the installation details, which will probably be different for your distro anyway unless you're using Fedora. Apologies if I have forgotten something as wel.

Running the stream

1. Connect your camera, ensuring that if the camera is automatically mounted by your operating system that you unmount it, otherwise you will get "device busy" errors.
2. Make sure the loopback kernel module is loaded:

   sudo modprobe v4l2loopback

   This should create a new video device in /dev, the device name will depend on what other video devices are already present (E.g. built-in laptop webcam). You can see all the devices by running the following:

   ls /dev/video*

   Your new loopback device should be the one with the highest number.
3. Stream the output from your camera to the virtual video device
   Using GStreamer:

   gphoto2 --stdout --capture-movie | gst-launch-0.10 fdsrc ! decodebin2 name=dec ! queue ! ffmpegcolorspace ! v4l2sink device=/dev/video0

   Using ffmpeg:

   gphoto2 --stdout --capture-movie | ffmpeg -i - -vcodec rawvideo -pix_fmt yuv420p -threads 0 -f v4l2 /dev/video0

   (Ensure that the binary names and device names match what is on your system)

You should now be able to select the Dummy Video Device in your video capturing software of choice (E.g. Zoom, Hangouts, etc.)

Hi @Briketellen, you'll need a camera that is supported by gphoto2, specifically the "Liveview" feature I think. They have a list of over 2700 models at http://gphoto.org/proj/libgphoto2/support.php along with what features are supported. I have heard some people find a bit of lag with the liveview feed so you may want to see if you can find a model that others are using successfully as a webcam.

Hope that helps!

Many thanks! Didn't even know my 40d had the ability to take video. May I ask how bad your frame latency is? Mine is over 800ms, which feels rather laggy.

Hey @stanleyjzheng, glad to be able to help!

I'm not sure how to measure the latency, however it feels almost instantaneous.

My Canon 70D motherboard ended up dying though - apparently a common problem when used for video for extended periods. These days I'm on a Sony A6400 which is also very snappy, and supposedly can handle long term video use.

Oh wow, I see! Thanks for your reply, I'll be sure to use this more sparingly. Thanks again for the awesome and easy to follow guide.