Example of a CI job moving from using bootstrap to pod utils

after.yaml

# periodic job in config/jobs/kubernetes-sigs/cluster-api-provider-gcp/cluster-api-provider-gcp-ci.yaml
- name: ci-cluster-api-provider-gcp-make-conformance-stable-k8s-ci-artifacts
  interval: 3h
  labels:
    preset-service-account: "true"
    preset-bazel-scratch-dir: "true"
    preset-bazel-remote-cache-enabled: "true"
    preset-dind-enabled: "true"
    preset-kind-volume-mounts: "true"
  decorate: true
  extra_refs:
  - org: kubernetes-sigs
    repo: cluster-api-provider-gcp
    base_ref: release-0.2
    path_alias: "sigs.k8s.io/cluster-api-provider-gcp"
  - org: kubernetes-sigs
    repo: cluster-api
    base_ref: master
    path_alias: "sigs.k8s.io/cluster-api"
  - org: kubernetes-sigs
    repo: image-builder
    base_ref: master
    path_alias: "sigs.k8s.io/image-builder"
  - org: kubernetes
    repo: kubernetes
    base_ref: master
    path_alias: k8s.io/kubernetes
  spec:
    containers:
      - image: gcr.io/k8s-testimages/kubekins-e2e:v20191105-e60677a-experimental
        env:
          - name: "CAPI_BRANCH"
            value: "stable"
          - name: "CABPK_BRANCH"
            value: "stable"
        command:
          - "runner.sh"
          - "./scripts/ci-e2e.sh"
          - "--use-ci-artifacts"
        # we need privileged mode in order to do docker in docker
        securityContext:
          privileged: true
        resources:
          requests:
            # these are both a bit below peak usage during build
            # this is mostly for building kubernetes
            memory: "9000Mi"
            # during the tests more like 3-20m is used
            cpu: 2000m
  annotations:
    testgrid-dashboards: sig-cluster-lifecycle-cluster-api-provider-gcp, sig-release-master-informing
    testgrid-tab-name: capg-conformance-stable-k8s-master
    testgrid-alert-email: kubernetes-sig-cluster-lifecycle-cluster-api-alerts@googlegroups.com
    testgrid-num-failures-to-alert: "2"

before.yaml

# periodic job in config/jobs/kubernetes-sigs/cluster-api-provider-gcp/cluster-api-provider-gcp-ci.yaml
- name: ci-cluster-api-provider-gcp-make-conformance-stable-k8s-ci-artifacts
  interval: 3h
  branches:
  - release-0.2
  labels:
    preset-service-account: "true"
    preset-bazel-scratch-dir: "true"
    preset-bazel-remote-cache-enabled: "true"
    preset-dind-enabled: "true"
    preset-kind-volume-mounts: "true"
  spec:
    containers:
      - image: gcr.io/k8s-testimages/kubekins-e2e:v20191103-6816af1-master
        env:
          - name: "CAPI_BRANCH"
            value: "stable"
          - name: "CABPK_BRANCH"
            value: "stable"
        args:
          - "--repo=k8s.io/kubernetes=master"
          - "--repo=sigs.k8s.io/cluster-api-provider-gcp=release-0.2"
          - "--repo=sigs.k8s.io/image-builder=master"
          - "--root=/go/src"
          - "--service-account=/etc/service-account/service-account.json"
          - "--upload=gs://kubernetes-jenkins/logs"
          - "--scenario=execute"
          - "--"
          - "bash"
          - "--"
          - "-c"
          - "cd ./../../sigs.k8s.io/cluster-api-provider-gcp && scripts/ci-e2e.sh --use-ci-artifacts"
        # we need privileged mode in order to do docker in docker
        securityContext:
          privileged: true
        resources:
          requests:
            # these are both a bit below peak usage during build
            # this is mostly for building kubernetes
            memory: "9000Mi"
            # during the tests more like 3-20m is used
            cpu: 2000m
  annotations:
    testgrid-dashboards: sig-cluster-lifecycle-cluster-api-provider-gcp, sig-release-master-informing
    testgrid-tab-name: capg-conformance-stable-k8s-master
    testgrid-alert-email: kubernetes-sig-cluster-lifecycle-cluster-api-alerts@googlegroups.com
    testgrid-num-failures-to-alert: "2"

notes.md

Read this first! : https://github.com/kubernetes/test-infra/blob/master/prow/pod-utilities.md

Note the example above is a periodic job.

1. name - no change
2. interval - no change
3. branches - move to extra_refs. Make sure the entry is the first in the list of repos in extra_refs. (WARNING: current work directory will not work properly otherwise)
4. labels - no change
   • use preset-bazel-scratch-dir and preset-bazel-remote-cache-enabled if you are building something using bazel
   • use preset-dind-enabled and preset-kind-volume-mounts if you are running kind (Also note the resources.requests/cpu/mem bump, copy them from an existing job)
5. add decorate: true to tell prow that you are using pod utils
6. for every repo in before.yaml that you needed using --repo=, add an entry in extra_refs.
   • Pay attention to the path_alias so it gets checked out in the correct directories on disk
   • be specific about base_ref as well.
   • Note the order of the repos again (see warning in 3. above)
7. spec.containers.image - no change
8. spec.containers.env - no change
9. switch over args: to command: (make sure you add runner.sh as the first param, this is the script that runs the command)
   • drop --repo as we moved them to extra_refs
   • drop --job, --root, --service-account, --upload and --scenario magic parameters we don't need them
   • don't need the bash -c stuff either, just pass the script we need as the second parameter in command and follow that with any other params needed by your script
10. securityContext, resources, annotations remain the same
11. Make sure any logs you need are under $ARTIFACTS/logs/
12. Make sure any references to /go/src is switched to /home/prow/go/src in your scripts
13. if there is a - --timeout=105 above the -- delimiter, use decoration_config like so:

    decoration_config:
      timeout: 105m

14. Oh! for the image: the latest kubekins-e2e image is fine to use

For pre-submit jobs:

1. No need to add extra_refs for the main repo, just ensure path_alias is correct.
2. current work directory will be the main repo (NOT the first entry in extra_refs)
3. always_run: true means, this CI job will run for every change
4. optional: true means, this CI job does not have to be green for the PR to merge

Tips:

• Always start with a presubmit job, get that working and then change the periodic job, so its easier to iterate
• Keep the interval small (every hour) to get things working and then switch it over to longer/desired duration
• use https://prow.k8s.io/?job=my-favorite-job* to see the last few runs (yes supports wild cards)
• if you don't see your repos cloned correctly check the clone-log.txt in the captured logs (click "Artifacts" link in the prow report for the failed job)

Finally, Don't forget to check the yaml indentation! when in doubt, find another CI job that does something similar and see how that is set up!

thanks @rikatz i've updated the gist for the --job, looks like the job you added was removed along the way. So here's another one i just landed https://github.com/kubernetes/test-infra/pull/30797/files

it does use the trick you have for the python script but from the newly checked out location for test-infra.