https://www.raspberrypi.com/news/raspberry-pi-pico-2-our-new-5-microcontroller-board-on-sale-now/
Raspberry
Adafruit
| # Setup and IP addressing: | |
| # 1) EVCC run on an NUC at 192.168.1.157 :7070 | |
| # 2) HomeWizard P1 meter reader at 192.168.1.98 :80 | |
| # 3) Shelly Pro EM - 50 as PV meter at 192.168.1.191 :80 | |
| # 4) TeslaWallConnector as Wall Charger at 192.168.1.42 :80 | |
| # 5) wimaha/TeslaBleHttpProxy as BLE proxy to control the Tesla at 192.168.1.157 :8080 | |
| # 6) teslamate-org/teslamate with mqtt broker at 192.168.1.35 :1883 | |
| network: | |
| schema: http |
| # Setup and IP addressing: | |
| # 1) EVCC run on an NUC at 192.168.1.157 :7070 | |
| # 2) HomeWizard P1 meter reader at 192.168.1.98 :80 | |
| # 3) Shelly Pro EM - 50 as PV meter at 192.168.1.191 :80 | |
| # 4) TeslaWallConnector as Wall Charger at 192.168.1.42 :80 | |
| # 5) wimaha/TeslaBleHttpProxy as BLE proxy to control the Tesla at 192.168.1.157 :8080 | |
| # 6) teslamate-org/teslamate with mqtt broker at 192.168.1.35 :1883 | |
| network: | |
| schema: http |
| K.APPLICATION | |
| K.Z | |
| K.C | |
| K.B | |
| K.M | |
| K.DOWN_ARROW | |
| K.SPACEBAR | |
| K.CAPS_LOCK | |
| K.S | |
| K.F |
| import supervisor | |
| supervisor.set_next_code_file(None, reload_on_error=True) | |
| import board | |
| import audiocore | |
| import audiobusio | |
| import audiomixer | |
| from digitalio import DigitalInOut, Direction, Pull | |
| from adafruit_debouncer import Debouncer |
| # SPDX-FileCopyrightText: 2022 David Glaude (based on 2021 ladyada for Adafruit Industries) | |
| # SPDX-License-Identifier: MIT | |
| # SPDX-FileCopyrightText: 2017 Scott Shawcroft, written for Adafruit Industries | |
| # SPDX-FileCopyrightText: Copyright (c) 2021 Carter Nelson for Adafruit Industries | |
| # | |
| # SPDX-License-Identifier: Unlicense | |
| # Simple demo of the VL53L1X distance sensor. | |
| # Will print the sensed range/distance every second. |
| """Three button drum machine on Pico DV base""" | |
| import time | |
| import board | |
| from digitalio import DigitalInOut, Direction, Pull | |
| from adafruit_debouncer import Debouncer | |
| import synthio | |
| import audiobusio | |
| import audiomixer |
| # Import all board pins. | |
| import board | |
| import busio | |
| import time | |
| import displayio | |
| import adafruit_displayio_ssd1306 | |
| import vectorio | |
| displayio.release_displays() |
| import storage, usb_cdc | |
| import board, digitalio | |
| import usb_hid, usb_midi | |
| # On the Macropad, pressing a key grounds it. You need to set a pull-up. | |
| # If not pressed, the key will be at +V (due to the pull-up). | |
| button = digitalio.DigitalInOut(board.KEY12) | |
| button.pull = digitalio.Pull.UP | |
| # Disable devices only if button is not pressed. |
| """Seeeduino XIAO RP2040: Build in RGB LED simultaniously as NeoPixel.""" | |
| import time | |
| import board | |
| import neopixel | |
| import digitalio | |
| BLACK = (0, 0, 0) | |
| RED = (255, 0, 0) | |
| GREEN = (0, 255, 0) | |
| BLUE = (0, 0, 255) |