Laravel Xampp setup on Mac and Windows

laravel_xampp_setup.md

Laravel Xampp Setup (Windows & Mac)

Install Xampp

Install Xampp from https://www.apachefriends.org/index.html

• Run the Xampp installer and open the Xampp control panel
• Make sure that you enable the Apache and MySQL services
• On mac you need to click "Start" on the Home tab, "Enable" on the Network tab and "Mount" on the Location Tab. Click "Explore" on the location tab to open your Xampp/Lampp folder

Install Composer

Go to https://getcomposer.org/download

• On Windows, download and run the installer
• On Mac, copy the php commands and run in the terminal. Then copy the mv command and run in terminal. You can also install composer with Homebrew

Create a New Laravel Project With Composer

Open a terminal in the htdocs folder. htdocs is where all of your local projects go.

htdocs folder location:

• Windows - C:\Xampp\htdocs
• Mac - /opt/lampp/htdocs

composer create-project --prefer-dist laravel/laravel PROJECT_NAME

Virtual Host Setup

We now need to create a virtual host for our project

Edit Hosts File

• Windows - C:/Windows/System32/drivers/etc/hosts
• Mac - /etc/hosts

Add these lines

127.0.0.1	localhost
127.0.0.1	PROJECT_NAME.test

Edit Virtual Hosts File

• Windows - C:/xampp/apache/conf/extra/httpd-vhosts.conf

<VirtualHost *:80>
    DocumentRoot "C:/xampp/htdocs"
    ServerName localhost
</VirtualHost>

<VirtualHost *:80>
    DocumentRoot "C:/xampp/htdocs/PROJECT_NAME/public"
    ServerName PROJECT_NAME.test
 </VirtualHost>

• Mac - /opt/lampp/etc/extra/httpd-vhosts.conf

<VirtualHost *:80>
    DocumentRoot /opt/lampp/htdocs
    ServerName localhost
    ServerAlias www.localhost
</VirtualHost>


<VirtualHost *:80>
    DocumentRoot /opt/lampp/htdocs/PROJECT_NAME/public
    ServerName PROJECT_NAME.test
    ServerAlias www.PROJECT_NAME.test
</VirtualHost>

Restart Apache with the Xampp panel

Now visit http://laravel.test ot htttp://laravel.test:8080 on Mac

If it does not work, make sure virtual hosts file is enabled in httpd.conf

• Windows - C:/xampp/apache/conf/httpd.conf
• Mac - /opt/lampp/etc/httpd.conf

Remove the # from the beginning of this line

#Include etc/extra/httpd-vhosts.conf

Save the file

This gist worked fine for me. But I did have to restart the computer after installing Composer and again after editing the virtual hosts file. Then I could see laragigs.test.

good to know

Well This was exactly how i did it too, using the conventional "php artisan serve ". Although the method brad used is cool, so you can have a customized name for your domain.
The most important thing is to get your site up and running

if you are unable to edit your hosts file, open your cmd with admin priviledges and then navigate to the etc folder.
then type in
"notepad hosts"
make sure you save the changes after you have made your edits

Change server name from PROJECT_NAME.test to localhost. It's works!

<VirtualHost *:80>
    DocumentRoot "C:/xampp/htdocs"
    ServerName xampp.test
</VirtualHost>

<VirtualHost *:80>
    DocumentRoot "C:/xampp/htdocs/PROJECT_NAME/public"
    ServerName localhost
 </VirtualHost>

https://youtu.be/ABxWF4WjLLE this worked for me

https://youtu.be/ABxWF4WjLLE this worked for me

For me too, just follow the original instructions of this post and change some names as in the example of the youtube video, works fine!
Thanks HoussemMhiri

I also struggled with the instructions on this page. I've documented the steps I took, and will paste them below.

This worked for me:

Software to Install

Install Xampp
Install Composer

Configure PHP.ini

Open Xampp and click on the Config button to the right of the Apache server. Choose PHP (php.ini) to edit the PHP configuration file.

Find the line that says ;extension=zip and remove the ; comment symbol to activate the ZIP extension.
Save the php.ini file.

Setup a New Laravel Project

Open a new Command Prompt (tap Windows key and search for cmd).
Type cd \xampp\htdocs (or another path if you installed Xampp anywhere else)

Create a new Laravel Project (laragigs in the below example), by typing the following:

composer create-project --prefer-dist laravel/laravel laragigs

Create a Virtual Host

To setup a virtual http://laragigs.test host for testing purposes, do the following:

Open a File Explorer and go to C:/Windows/System32/drivers/etc.
Open the file called hosts in a text editor with Admin Privileges.

Add these two lines to the bottom of the hosts file:

127.0.0.1	localhost
127.0.0.1	laragigs.test

Save the file.

Then go to C:/xampp/apache/conf/extra and open the file called httpd-vhosts.conf.

Add these lines to the bottom:

<VirtualHost *:80>
    DocumentRoot "C:/xampp/htdocs"
    ServerName localhost
</VirtualHost>

<VirtualHost *:80>
    DocumentRoot "C:/xampp/htdocs/laragigs/public"
    ServerName laragigs.test
 </VirtualHost>

Save the document and restart the Apache Server in Xampp.

Then surf to http://laragigs.test and you should see the default Laravel startpage.

Open Laravel Project Folder in Visual Studio Code

Open a Command Prompt if you haven't done so already and cd into the \xampp\htdocs\laragigs folder.

Now, type in code . to open the current folder in Visual Studio Code.

Et voilá!

I couldn't get this to work either. I think what was meant was: http://laragigs.test/ rather than http://laravel.test/ but that also didn't work for me. What I did instead was use the artisan server: First I opened up a terminal (I didn't use VS Code for this - just cmd as I'm in Windows) Then I navigated to c:\xampp\htdocs\laragigs in that terminal (cd c:\xampp\htdocs\laragigs) Finally I entered: php artisan serve (and Enter) You should see a message: Starting Laravel development server: http://127.0.0.1:8000 (at least for me the port was 8000) In your browser type http://127.0.0.1:8000 (or whatever your port was other than 8000) as the url and you should be on your way. Using this method the root is c:\xampp\htdocs\laragigs and you should be able to follow along with Brad's tutorial, as I was, without having to change any config files etc. Hope this works for you! Ted
…
On Sat, Jun 4, 2022 at 5:10 PM rishisriv @.> wrote: @.* commented on this gist. ------------------------------ any update? I am also having issue using this gist to setup Laravel. After I do everything it says when I execute: Restart Apache with the Xampp panel Now visit http://laravel.test/ ot htttp://laravel.test:8080 on Mac I get server not found error. Please help. — Reply to this email directly, view it on GitHub https://gist.github.com/7485f928e3e8f08ee6bccbe0a681a821#gistcomment-4189526, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIPWFBP55S4ARJVREX7N2KDVNPH4TANCNFSM5UZMZOHA . You are receiving this because you commented.Message ID: @.***>

This worked