Script to plot "rainbowgrams" from NSynth (https://arxiv.org/abs/1704.01279)

rainbowgram.py

import os

import librosa
import matplotlib
import matplotlib.pyplot as plt
matplotlib.rcParams['svg.fonttype'] = 'none'
import numpy as np
from scipy.io.wavfile import read as readwav

# Constants
n_fft = 512
hop_length = 256
SR = 16000
over_sample = 4
res_factor = 0.8
octaves = 6
notes_per_octave=10


# Plotting functions
cdict  = {'red':  ((0.0, 0.0, 0.0),
                   (1.0, 0.0, 0.0)),

         'green': ((0.0, 0.0, 0.0),
                   (1.0, 0.0, 0.0)),

         'blue':  ((0.0, 0.0, 0.0),
                   (1.0, 0.0, 0.0)),

         'alpha':  ((0.0, 1.0, 1.0),
                   (1.0, 0.0, 0.0))
        }

my_mask = matplotlib.colors.LinearSegmentedColormap('MyMask', cdict)
plt.register_cmap(cmap=my_mask)

def note_specgram(path, ax, peak=70.0, use_cqt=True):
  # Add several samples together
  if isinstance(path, list):
    for i, p in enumerate(path):
      sr, a = readwav(f)
      audio = a if i == 0 else a + audio
  # Load one sample
  else:    
      sr, audio = readwav(f)
  audio = audio.astype(np.float32)
  if use_cqt:
    C = librosa.cqt(audio, sr=sr, hop_length=hop_length, 
                      bins_per_octave=int(notes_per_octave*over_sample), 
                      n_bins=int(octaves * notes_per_octave * over_sample),
                      real=False, 
                      filter_scale=res_factor, 
                      fmin=librosa.note_to_hz('C2'))
  else:
    C = librosa.stft(audio, n_fft=n_fft, win_length=n_fft, hop_length=hop_length, center=True)
  mag, phase = librosa.core.magphase(C)
  phase_angle = np.angle(phase)
  phase_unwrapped = np.unwrap(phase_angle)
  dphase = phase_unwrapped[:, 1:] - phase_unwrapped[:, :-1]
  dphase = np.concatenate([phase_unwrapped[:, 0:1], dphase], axis=1) / np.pi
  mag = (librosa.logamplitude(mag**2, amin=1e-13, top_db=peak, ref_power=np.max) / peak) + 1
  ax.matshow(dphase[::-1, :], cmap=plt.cm.rainbow)
  ax.matshow(mag[::-1, :], cmap=my_mask)

    
def plot_notes(list_of_paths, rows=2, cols=4, col_labels=[], row_labels=[],
              use_cqt=True, peak=70.0):
  """Build a CQT rowsXcols.
  """
  column = 0
  N = len(list_of_paths)
  assert N == rows*cols
  fig, axes = plt.subplots(rows, cols, sharex=True, sharey=True)
  fig.subplots_adjust(left=0.1, right=0.9, wspace=0.05, hspace=0.1)
  
  #   fig = plt.figure(figsize=(18, N * 1.25))
  for i, path in enumerate(list_of_paths):
    row = i / cols
    col = i % cols
    if rows == 1:
      ax = axes[col]
    elif cols == 1:
      ax = axes[row]
    else:
      ax = axes[row, col]
    
    print row, col, path, ax, peak, use_cqt
    note_specgram(path, ax, peak, use_cqt)
    
    ax.set_axis_bgcolor('white')
    ax.set_xticks([]); ax.set_yticks([])
    if col == 0 and row_labels:
      ax.set_ylabel(row_labels[row])
    if row == rows-1 and col_labels:
      ax.set_xlabel(col_labels[col])

Because for standard WAV file (PCM 16-bit or float 32-bit) scipy is much faster. However, librosa load function supports mp3 and other formats by using ffmpeg.

Because for standard WAV file (PCM 16-bit or float 32-bit) scipy is much faster. However, librosa load function supports mp3 and other formats by using ffmpeg.

Thank you for the answer, this makes sense. I had to figure out the hard way that librosa is much slower than scipy when it comes to loading in audio.

Need to change print statement on line 87 to
print(row, col, path, ax, peak, use_cqt)

Then librosa.cqt cmd in line 48 to
` C = librosa.cqt(audio, sr=sr, hop_length=hop_length,
fmin=librosa.note_to_hz('C2'),
n_bins=int(octaves * notes_per_octave * over_sample),
bins_per_octave=int(notes_per_octave*over_sample),
filter_scale=res_factor)

In line 61 : logamplitude does not exist anymore (replaced by amplitude_to_db)