Unity3D: script to save an AudioClip as a .wav file.

SavWav.cs

//	Copyright (c) 2012 Calvin Rien
//        http://the.darktable.com
//
//	This software is provided 'as-is', without any express or implied warranty. In
//	no event will the authors be held liable for any damages arising from the use
//	of this software.
//
//	Permission is granted to anyone to use this software for any purpose,
//	including commercial applications, and to alter it and redistribute it freely,
//	subject to the following restrictions:
//
//	1. The origin of this software must not be misrepresented; you must not claim
//	that you wrote the original software. If you use this software in a product,
//	an acknowledgment in the product documentation would be appreciated but is not
//	required.
//
//	2. Altered source versions must be plainly marked as such, and must not be
//	misrepresented as being the original software.
//
//	3. This notice may not be removed or altered from any source distribution.
//
//  =============================================================================
//
//  derived from Gregorio Zanon's script
//  http://forum.unity3d.com/threads/119295-Writing-AudioListener.GetOutputData-to-wav-problem?p=806734&viewfull=1#post806734

using System;
using System.IO;
using UnityEngine;
using System.Collections.Generic;

public static class SavWav {

	const int HEADER_SIZE = 44;

	public static bool Save(string filename, AudioClip clip) {
		if (!filename.ToLower().EndsWith(".wav")) {
			filename += ".wav";
		}

		var filepath = Path.Combine(Application.persistentDataPath, filename);

		Debug.Log(filepath);

		// Make sure directory exists if user is saving to sub dir.
		Directory.CreateDirectory(Path.GetDirectoryName(filepath));

		using (var fileStream = CreateEmpty(filepath)) {

			ConvertAndWrite(fileStream, clip);

			WriteHeader(fileStream, clip);
		}

		return true; // TODO: return false if there's a failure saving the file
	}

	public static AudioClip TrimSilence(AudioClip clip, float min) {
		var samples = new float[clip.samples];

		clip.GetData(samples, 0);

		return TrimSilence(new List<float>(samples), min, clip.channels, clip.frequency);
	}

	public static AudioClip TrimSilence(List<float> samples, float min, int channels, int hz) {
		return TrimSilence(samples, min, channels, hz, false, false);
	}

	public static AudioClip TrimSilence(List<float> samples, float min, int channels, int hz, bool _3D, bool stream) {
		int i;

		for (i=0; i<samples.Count; i++) {
			if (Mathf.Abs(samples[i]) > min) {
				break;
			}
		}

		samples.RemoveRange(0, i);

		for (i=samples.Count - 1; i>0; i--) {
			if (Mathf.Abs(samples[i]) > min) {
				break;
			}
		}

		samples.RemoveRange(i, samples.Count - i);

		var clip = AudioClip.Create("TempClip", samples.Count, channels, hz, _3D, stream);

		clip.SetData(samples.ToArray(), 0);

		return clip;
	}

	static FileStream CreateEmpty(string filepath) {
		var fileStream = new FileStream(filepath, FileMode.Create);
	    byte emptyByte = new byte();

	    for(int i = 0; i < HEADER_SIZE; i++) //preparing the header
	    {
	        fileStream.WriteByte(emptyByte);
	    }

		return fileStream;
	}

	static void ConvertAndWrite(FileStream fileStream, AudioClip clip) {

		var samples = new float[clip.samples];

		clip.GetData(samples, 0);

		Int16[] intData = new Int16[samples.Length];
		//converting in 2 float[] steps to Int16[], //then Int16[] to Byte[]

		Byte[] bytesData = new Byte[samples.Length * 2];
		//bytesData array is twice the size of
		//dataSource array because a float converted in Int16 is 2 bytes.

		int rescaleFactor = 32767; //to convert float to Int16

		for (int i = 0; i<samples.Length; i++) {
			intData[i] = (short) (samples[i] * rescaleFactor);
			Byte[] byteArr = new Byte[2];
			byteArr = BitConverter.GetBytes(intData[i]);
			byteArr.CopyTo(bytesData, i * 2);
		}

		fileStream.Write(bytesData, 0, bytesData.Length);
	}

	static void WriteHeader(FileStream fileStream, AudioClip clip) {

		var hz = clip.frequency;
		var channels = clip.channels;
		var samples = clip.samples;

		fileStream.Seek(0, SeekOrigin.Begin);

		Byte[] riff = System.Text.Encoding.UTF8.GetBytes("RIFF");
		fileStream.Write(riff, 0, 4);

		Byte[] chunkSize = BitConverter.GetBytes(fileStream.Length - 8);
		fileStream.Write(chunkSize, 0, 4);

		Byte[] wave = System.Text.Encoding.UTF8.GetBytes("WAVE");
		fileStream.Write(wave, 0, 4);

		Byte[] fmt = System.Text.Encoding.UTF8.GetBytes("fmt ");
		fileStream.Write(fmt, 0, 4);

		Byte[] subChunk1 = BitConverter.GetBytes(16);
		fileStream.Write(subChunk1, 0, 4);

		UInt16 two = 2;
		UInt16 one = 1;

		Byte[] audioFormat = BitConverter.GetBytes(one);
		fileStream.Write(audioFormat, 0, 2);

		Byte[] numChannels = BitConverter.GetBytes(channels);
		fileStream.Write(numChannels, 0, 2);

		Byte[] sampleRate = BitConverter.GetBytes(hz);
		fileStream.Write(sampleRate, 0, 4);

		Byte[] byteRate = BitConverter.GetBytes(hz * channels * 2); // sampleRate * bytesPerSample*number of channels, here 44100*2*2
		fileStream.Write(byteRate, 0, 4);

		UInt16 blockAlign = (ushort) (channels * 2);
		fileStream.Write(BitConverter.GetBytes(blockAlign), 0, 2);

		UInt16 bps = 16;
		Byte[] bitsPerSample = BitConverter.GetBytes(bps);
		fileStream.Write(bitsPerSample, 0, 2);

		Byte[] datastring = System.Text.Encoding.UTF8.GetBytes("data");
		fileStream.Write(datastring, 0, 4);

		Byte[] subChunk2 = BitConverter.GetBytes(samples * channels * 2);
		fileStream.Write(subChunk2, 0, 4);

//		fileStream.Close();
	}
}

Excuse me, if I only want to keep the sound part of the recorded audio, remove the mute part, how should I achieve it? @belzecue

Nice one, thank you ♥

When i use this the below code.
savwav.Save("test", myAudioClip);

it says .. NullReferenceException: Object reference not set to an instance of an object

what i have to do for saving the file . and how i replay it..

How Can I Read Saved clip?

How Can I Read Saved clip?

Unity has native methods for reading the sample data of an audio clip.

I'm still working on this, but here's a script file that enables you to read metadata from a wave file directly. I originally made this to read the cues inside a wave, but I later added the ability to get the sample data as well. I've tested with a small handful of wave files and they have worked well so far, but I'm sure it has some bugs.

`using UnityEngine;
using System;
using System.IO;

namespace Mordi
{
namespace WaveFile
{
///

/// Metadata of a wave file.
///

[Serializable]
public class Metadata
{
///

/// Name of the file, including extension.
///

public string filename;

        /// <summary>
        /// Duration of audio (in seconds).
        /// </summary>
        public float duration;

        /// <summary>
        /// Total file size in bytes.
        /// </summary>
        public uint fileBytes;

        /// <summary>
        /// RIFF type ID. Usually "WAVE".
        /// </summary>
        public string riffTypeID;

        /// <summary>
        /// Compression code. Uncompressed PCM audio will have a value of 1.
        /// </summary>
        public uint compressionCode;

        /// <summary>
        /// Number of audio channels. 1 = Mono, 2 = Stereo.
        /// </summary>
        public uint channelCount;

        /// <summary>
        /// Samples per second.
        /// </summary>
        public uint sampleRate;

        /// <summary>
        /// Average bytes per second. For example, a PCM wave file that has a sampling rate of 44100 Hz, 1 channel, and sampling resolution of 16 bits (2 bytes) per sample, will have an average number of bytes equal to 44100 * 2 * 1 = 88,200.
        /// </summary>
        public uint avgBytesPerSec;

        /// <summary>
        /// Byte-size of sample blocks. For example, a PCM wave that has a sampling resolution of 16 bits (2 bytes) and has 2 channels will record a block of samples in 2 * 2 = 4 bytes.
        /// </summary>
        public uint blockAlign;

        /// <summary>
        /// Significant bits per sample. Defines the sampling resolution of the file. A typical sampling resolution is 16 bits per sample, but could be anything greater than 1.
        /// </summary>
        public uint bitRate;

        /// <summary>
        /// Total number of audio samples.
        /// </summary>
        public uint sampleCount;

        /// <summary>
        /// Cues/markers found in the wave file.
        /// </summary>
        public Cue[] cues;

        public void Print() {
            string str;
            str = filename + "\n";
            str += "Duration: " + duration + " s\n";
            str += "Size: " + fileBytes + "\n";
            str += "Riff type ID: " + riffTypeID + "\n";
            str += "Compression code: " + compressionCode + "\n";
            str += "Channel count: " + channelCount + "\n";
            str += "Sample rate: " + sampleRate + "\n";
            str += "Avg bytes per sec: " + avgBytesPerSec + "\n";
            str += "Block align: " + blockAlign + "\n";
            str += "Bitrate: " + bitRate + "\n";
            str += "Sample count: " + sampleCount + "\n";
            if (cues == null)
                str += "No cues";
            else
                str += "Cues:\n";
            foreach(Cue c in cues) {
                str += string.Format(" - ID: {0} - Name: {1} - Position: {2} - dataChunkID: {3}\n", c.ID, c.name, c.position, c.dataChunkID);
            }
            Debug.Log(str);
        }
    }

    /// <summary>
    /// A cue from inside the wave-file.
    /// </summary>
    [Serializable]
    public struct Cue
    {
        /// <summary>
        /// Unique index of this cue.
        /// </summary>
        public uint ID;

        /// <summary>
        /// Identifier-string for the cue/marker.
        /// </summary>
        public string name;

        /// <summary>
        /// The sample on which this cue appears within the audio.
        /// </summary>
        public uint position;

        /// <summary>
        /// Either "data" or "slnt" depending on whether the cue occurs in a data chunk or in a silent chunk.
        /// </summary>
        public uint dataChunkID;
    }

    /// <summary>
    /// Reads metadata from a wave file.
    /// </summary>
    public static class Reader
    {
        /// <summary>
        /// Get metadata from a given wave file.
        /// </summary>
        /// <param name="path">Path to the file, including extension.</param>
        /// <returns>Metadata object.</returns>
        public static Metadata GetMetadata(string path) {
            // Check if file exists
            if (!File.Exists(path)) {
                Debug.LogError("Couldn't locate file: " + path);
                return null;
            }

            // Check filetype
            string ext = Path.GetExtension(path);
            if (!(ext == ".wav" || ext == ".bwf")) {
                Debug.LogWarning("Only extensions .wav and .bwf are supported for reading metadata: " + path);
                return null;
            }

            Metadata data = new Metadata();
            data.filename = Path.GetFileName(path);
            FileStream fs = new FileStream(path, FileMode.Open);
            int n = 0;
            // TODO: Change into a for-loop
            while (fs.Position < fs.Length) {
                ReadNextChunk(fs, data);

                if (n > 999) {
                    Debug.LogError("Cancelled infinite loop upon reading wave file metadata...");
                    break;
                }
                n++;
            }

            fs.Close();

            // Calculate duration
            data.duration = (float)data.sampleCount / data.sampleRate;

            // Debug
            //data.Print();

            return data;
        }

        /// <summary>
        /// Reads the next chunk of a wave file. Reference: https://www.recordingblogs.com/wiki/wave-file-format
        /// </summary>
        /// <param name="fs">FileStream object</param>
        /// <param name="data">Metadata object</param>
        static void ReadNextChunk(FileStream fs, Metadata data) {
            long initialPos = fs.Position;
            string chunkID = GetString(fs, 4);
            uint chunkSize = GetUInt(fs, 4);
            long chunkEndPos = initialPos + chunkSize + 8;

            //Debug.Log(chunkID);

            switch (chunkID.ToUpper()) {
                case "RIFF":
                    data.fileBytes = chunkSize + 8;
                    data.riffTypeID = GetString(fs, 4);
                    break;
                case "FMT ":
                    data.compressionCode = GetUInt(fs, 2);
                    data.channelCount = GetUInt(fs, 2);
                    data.sampleRate = GetUInt(fs, 4);
                    data.avgBytesPerSec = GetUInt(fs, 4);
                    data.blockAlign = GetUInt(fs, 2);
                    data.bitRate = GetUInt(fs, 2);
                    fs.Position = chunkEndPos; // Go to end of chunk
                    break;
                case "DATA":
                    data.sampleCount = chunkSize / (data.channelCount + data.bitRate / 8);
                    fs.Position = chunkEndPos; // Go to end of chunk
                    break;
                case "CUE ":
                    uint cueCount = (GetUInt(fs, 4));
                    data.cues = new Cue[cueCount];

                    // Loop through cues
                    for (int i = 0; i < cueCount; i++) {
                        long p = fs.Position;
                        data.cues[i].ID = GetUInt(fs, 4);
                        data.cues[i].position = GetUInt(fs, 4);
                        data.cues[i].dataChunkID = GetUInt(fs, 4);

                        fs.Position = p + 24; // Skip to next cue
                    }
                    fs.Position = chunkEndPos; // Go to end of chunk
                    break;
                case "LIST":
                    string listID = GetString(fs, 4).ToUpper();
                    if (listID == "ADTL") { // ADTL = Associated Data List
                        uint remainingBytes = chunkSize - 4;

                        string subChunkID;
                        uint subChunkSize;
                        int cueIndex = 0;

                        while (remainingBytes > 0) {
                            subChunkID = GetString(fs, 4); // labl
                            subChunkSize = GetUInt(fs, 4); // chunk size

                            if (subChunkID.ToUpper() == "LABL" && data.cues != null) {
                                data.cues[cueIndex].ID = GetUInt(fs, 4);
                                data.cues[cueIndex].name = GetString(fs, (int)subChunkSize - 4);

                                remainingBytes -= subChunkSize + 8;

                                // Check for uneven number of remaining bytes (which means the next byte is an empty padding)
                                if (remainingBytes % 2 == 1) {
                                    remainingBytes -= 1;
                                    fs.ReadByte(); // Read the padded byte
                                }

                                cueIndex++;
                            } else {
                                remainingBytes -= subChunkSize;
                                fs.Seek(subChunkSize, SeekOrigin.Current); // Go to end of subchunk
                            }
                        }
                    }
                    fs.Position = chunkEndPos; // Go to end of chunk
                    break;
                default:
                    fs.Position = chunkEndPos; // Go to end of chunk
                    break;
            }
        }
        
        /// <summary>
        /// Read a file and get only the data chunk.
        /// </summary>
        /// <param name="fs">FileStream object reading from a wave file.</param>
        static int[] GetDataChunk(FileStream fs, int arraySize) {

            uint channelCount = 0, bitRate = 0, compressionCode = 0;

            for (int i = 0; i < 99; i++) {
                long initialPos = fs.Position;
                string chunkID = GetString(fs, 4);
                uint chunkSize = GetUInt(fs, 4);
                long chunkEndPos = initialPos + chunkSize + 8;

                switch (chunkID.ToUpper()) {
                    case "RIFF":
                        fs.Position += 4;
                        break;
                    case "FMT ":
                        compressionCode = GetUInt(fs, 2);
                        channelCount = GetUInt(fs, 2);
                        GetUInt(fs, 4); // sample rate
                        GetUInt(fs, 4); // avg bytes per sec
                        GetUInt(fs, 2); // block align
                        bitRate = GetUInt(fs, 2);
                        fs.Position = chunkEndPos; // Go to end of chunk
                        break;
                    case "DATA":
                        if (compressionCode != 1)
                            return null;

                        // Convert byte array to int array
                        uint sampleCount = chunkSize / (channelCount + bitRate / 8);
                        int[] sampleData = new int[arraySize];
                        for(int n = 0; n < sampleData.Length; n ++) {
                            int avg = 0;
                            int numberOfCollatedSamples = ((int)sampleCount / sampleData.Length) * (int)channelCount;
                            for (int m = 0; m < numberOfCollatedSamples; m++) {
                                avg += Mathf.Abs(GetInt16(fs, 2));
                            }

                            avg = avg / numberOfCollatedSamples;
                            sampleData[n] = avg;
                        }

                        return sampleData;
                    default:
                        fs.Position = chunkEndPos;
                        break;
                }
            }

            return null;
        }

        static uint GetUInt(FileStream fs, int num) {
            return BitConverter.ToUInt32(ReadBytes(fs, num), 0);
        }

        static int GetInt16(FileStream fs, int num) {
            return BitConverter.ToInt16(ReadBytes(fs, num), 0);
        }

        static string GetString(FileStream fs, int num) {
            return System.Text.Encoding.UTF8.GetString(ReadBytes(fs, num)).Trim('\0');
        }

        static byte[] ReadBytes(FileStream fs, int num) {
            byte[] bytes = new byte[num < 4 ? 4 : num];
            for (int i = 0; i < num; i++) {
                int b = fs.ReadByte();
                bytes[i] = (byte)b;
            }
            return bytes;
        }
    }
}

}
`

The SavWav and the Script attached are both in my assets, I have this script to record my Voice in game, I took the script and put it in a random game object.. when I hit record and then save, I can see the .wav file in the assets folder but it only records for 10 seconds and when I play the file I can't hear anything..
Can anyone please help..

ConvertAndWrite has a bug, please refer to https://docs.unity3d.com/ScriptReference/AudioClip.GetData.html
var samples = new float[clip.samples];
should be fixed as
var samples = new float[clip.samples * clip.channels];

This bug results to stereo files are saved with half duration.

GetData returns data, not 'samples'. In case of mono they are equal, but in case of stereo each sample is 2 bytes of data.
To be correct, you should also rename 'samples' variable to 'data'.

ConvertAndWrite has a bug, please refer to https://docs.unity3d.com/ScriptReference/AudioClip.GetData.html var samples = new float[clip.samples]; should be fixed as var samples = new float[clip.samples * clip.channels];

This bug results to stereo files are saved with half duration.

GetData returns data, not 'samples'. In case of mono they are equal, but in case of stereo each sample is 2 bytes of data. To be correct, you should also rename 'samples' variable to 'data'.

Thanks you 👍. Helped me a lot.

Great work!

This code is just what I needed for our current project. Thank you very much!